This is the latest recevied telemetry packets stored in our database for station/object HS6ZHI-1. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | RxTraffic* | TxTraffic* | RxDrop* | RSSI* | Voltage* |
|---|---|---|---|---|---|
| 1786740043 | 0 Pkt | 1 Pkt | 0 Pkt | -57 dBm | 0 V |
| 1786739119 | 0 Pkt | 0 Pkt | 0 Pkt | -57 dBm | 0 V |
| 1786738194 | 0 Pkt | 0 Pkt | 0 Pkt | -56 dBm | 0 V |
| 1786737269 | 0 Pkt | 0 Pkt | 0 Pkt | -56 dBm | 0 V |
| 1786736345 | 0 Pkt | 0 Pkt | 0 Pkt | -56 dBm | 0 V |
| 1786735421 | 0 Pkt | 0 Pkt | 0 Pkt | -56 dBm | 0 V |
| 1786734496 | 0 Pkt | 0 Pkt | 0 Pkt | -56 dBm | 0 V |
| 1786733572 | 0 Pkt | 0 Pkt | 0 Pkt | -57 dBm | 0 V |
| 1786732647 | 0 Pkt | 0 Pkt | 0 Pkt | -56 dBm | 0 V |
| 1786731723 | 0 Pkt | 0 Pkt | 0 Pkt | -56 dBm | 0 V |
| 1786730799 | 0 Pkt | 1 Pkt | 0 Pkt | -56 dBm | 0 V |
| 1786729874 | 0 Pkt | 0 Pkt | 0 Pkt | -56 dBm | 0 V |
| 1786728950 | 0 Pkt | 0 Pkt | 0 Pkt | -57 dBm | 0 V |
| 1786728025 | 0 Pkt | 0 Pkt | 0 Pkt | -57 dBm | 0 V |
| 1786727101 | 0 Pkt | 1 Pkt | 0 Pkt | -58 dBm | 0 V |
| 1786726177 | 0 Pkt | 0 Pkt | 0 Pkt | -58 dBm | 0 V |
| 1786725252 | 0 Pkt | 0 Pkt | 0 Pkt | -57 dBm | 0 V |
| 1786724329 | 0 Pkt | 0 Pkt | 0 Pkt | -57 dBm | 0 V |
| 1786723403 | 0 Pkt | 2 Pkt | 0 Pkt | -58 dBm | 0 V |
| 1786722481 | 0 Pkt | 0 Pkt | 0 Pkt | -57 dBm | 0 V |
| 1786721554 | 0 Pkt | 0 Pkt | 0 Pkt | -57 dBm | 0 V |
| 1786720630 | 0 Pkt | 0 Pkt | 0 Pkt | -56 dBm | 0 V |
| 1786719708 | 0 Pkt | 0 Pkt | 0 Pkt | -58 dBm | 0 V |
| 1786718781 | 0 Pkt | 0 Pkt | 0 Pkt | -57 dBm | 0 V |
| 1786717859 | 0 Pkt | 0 Pkt | 0 Pkt | -59 dBm | 0 V |
*Used Equation Coefficients:
RxTraffic: 0, 1, 0
TxTraffic: 0, 1, 0
RxDrop: 0, 1, 0
RSSI: 0, -1, 0
Voltage: 0, 1, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)