APRS Track Direct

My position About ☰

reset

KJ4UJW-3 Telemetry

This is the latest recevied telemetry packets stored in our database for station/object KJ4UJW-3. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

<< 1 2 >>

Time	Temp*	RH*	Bat1*
1732287774	69.8 deg.F	37 Pct	13.2 V
1732287008	70.7 deg.F	36.5 Pct	13.5 V
1732286229	70.7 deg.F	37.5 Pct	13.5 V
1732283891	69.8 deg.F	38.5 Pct	13.58 V
1732283112	69.8 deg.F	39.5 Pct	13.5 V
1732282319	69.8 deg.F	39.5 Pct	13.2 V
1732281553	69.8 deg.F	40.5 Pct	13.43 V
1732280774	69.8 deg.F	41.5 Pct	13.5 V
1732279995	68.9 deg.F	42 Pct	13.5 V
1732278436	68.9 deg.F	41.5 Pct	13.5 V
1732277657	68.9 deg.F	41 Pct	13.5 V
1732276865	68.9 deg.F	41 Pct	13.2 V
1732276098	69.8 deg.F	40.5 Pct	13.5 V
1732275319	68.9 deg.F	40.5 Pct	13.43 V
1732274540	69.8 deg.F	40 Pct	13.5 V
1732273760	69.8 deg.F	39.5 Pct	13.5 V
1732272202	70.7 deg.F	37.5 Pct	13.5 V
1732271409	70.7 deg.F	38 Pct	11.18 V
1732269085	71.6 deg.F	38.5 Pct	13.5 V
1732267526	71.6 deg.F	39.5 Pct	13.5 V
1732266747	71.6 deg.F	40.5 Pct	13.5 V
1732265968	70.7 deg.F	42 Pct	13.5 V
1732265188	71.6 deg.F	41 Pct	13.43 V
1732264409	70.7 deg.F	41.5 Pct	13.35 V
1732263630	70.7 deg.F	41.5 Pct	13.5 V

*Used Equation Coefficients:

Temp: 0, 0.9, -83.2

RH: 0, 0.5, 0

Bat1: 0, 0.075, 0

Bat2: 0, 0.075, 0

Spr: 0, 0, 0

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)