This is the latest recevied telemetry packets stored in our database for station/object ON0ABT-2. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
Time | Vin* | Rx1h* | Dg1h* | Eff1h* | None* |
---|---|---|---|---|---|
1731478609 | 13.58 Volt | 1270 Pkt | 240 Pkt | 72 Pcnt | 0 None |
1731478014 | 14.48 Volt | 1310 Pkt | 240 Pkt | 73 Pcnt | 0 None |
1731477409 | 13.8 Volt | 1260 Pkt | 230 Pkt | 72 Pcnt | 0 None |
1731476820 | 14.48 Volt | 1250 Pkt | 220 Pkt | 72 Pcnt | 0 None |
1731476207 | 14.48 Volt | 1250 Pkt | 220 Pkt | 72 Pcnt | 0 None |
1731475609 | 14.48 Volt | 1270 Pkt | 230 Pkt | 72 Pcnt | 0 None |
1731475018 | 14.48 Volt | 1220 Pkt | 210 Pkt | 71 Pcnt | 0 None |
1731474412 | 14.48 Volt | 1240 Pkt | 210 Pkt | 73 Pcnt | 0 None |
1731473807 | 14.48 Volt | 1250 Pkt | 220 Pkt | 74 Pcnt | 0 None |
1731473203 | 14.48 Volt | 1280 Pkt | 230 Pkt | 75 Pcnt | 0 None |
1731472604 | 14.48 Volt | 1260 Pkt | 220 Pkt | 75 Pcnt | 0 None |
1731472005 | 14.48 Volt | 1270 Pkt | 220 Pkt | 76 Pcnt | 0 None |
1731471408 | 14.48 Volt | 1330 Pkt | 230 Pkt | 76 Pcnt | 0 None |
1731470801 | 14.33 Volt | 1320 Pkt | 230 Pkt | 75 Pcnt | 0 None |
1731470205 | 14.48 Volt | 1360 Pkt | 230 Pkt | 75 Pcnt | 0 None |
1731469605 | 14.48 Volt | 1390 Pkt | 240 Pkt | 76 Pcnt | 0 None |
1731469012 | 14.48 Volt | 1450 Pkt | 250 Pkt | 76 Pcnt | 0 None |
1731468402 | 13.5 Volt | 1490 Pkt | 280 Pkt | 76 Pcnt | 0 None |
1731467801 | 14.48 Volt | 1510 Pkt | 300 Pkt | 77 Pcnt | 0 None |
1731466610 | 14.48 Volt | 1460 Pkt | 300 Pkt | 77 Pcnt | 0 None |
1731466006 | 14.48 Volt | 1380 Pkt | 280 Pkt | 76 Pcnt | 0 None |
1731465406 | 14.48 Volt | 1300 Pkt | 250 Pkt | 75 Pcnt | 0 None |
1731464798 | 14.48 Volt | 1240 Pkt | 220 Pkt | 74 Pcnt | 0 None |
1731464201 | 14.48 Volt | 1120 Pkt | 180 Pkt | 73 Pcnt | 0 None |
*Used Equation Coefficients:
Vin: 0, 0.075, 0
Rx1h: 0, 10, 0
Dg1h: 0, 10, 0
Eff1h: 0, 1, 0
None: 0, 0, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)