This is the latest recevied telemetry packets stored in our database for station/object OK2ILA-11. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | Temp* | Pres* | Humi* | Value4* | Value5* |
|---|---|---|---|---|---|
| 1744053901 | 11 °C | 1026 hPa | 45 % | 0 | 0 |
| 1744053601 | 11 °C | 1026 hPa | 45 % | 0 | 0 |
| 1744053301 | 10.5 °C | 1026 hPa | 47 % | 0 | 0 |
| 1744053001 | 11 °C | 1026 hPa | 46 % | 0 | 0 |
| 1744052701 | 11 °C | 1026 hPa | 45 % | 0 | 0 |
| 1744052401 | 11.5 °C | 1026 hPa | 44 % | 0 | 0 |
| 1744052101 | 11 °C | 1026 hPa | 44 % | 0 | 0 |
| 1744051801 | 11.5 °C | 1026 hPa | 43 % | 0 | 0 |
| 1744051501 | 11.5 °C | 1026 hPa | 43 % | 0 | 0 |
| 1744051201 | 11 °C | 1026 hPa | 44 % | 0 | 0 |
| 1744050901 | 11.5 °C | 1025 hPa | 43 % | 0 | 0 |
| 1744050601 | 11.5 °C | 1025 hPa | 42 % | 0 | 0 |
| 1744050301 | 11.5 °C | 1025 hPa | 42 % | 0 | 0 |
| 1744050001 | 11.5 °C | 1025 hPa | 42 % | 0 | 0 |
| 1744049701 | 11.5 °C | 1025 hPa | 42 % | 0 | 0 |
| 1744049401 | 11.5 °C | 1025 hPa | 41 % | 0 | 0 |
| 1744049101 | 12 °C | 1025 hPa | 41 % | 0 | 0 |
| 1744048801 | 12 °C | 1025 hPa | 40 % | 0 | 0 |
| 1744048501 | 12 °C | 1025 hPa | 41 % | 0 | 0 |
| 1744048201 | 12 °C | 1025 hPa | 41 % | 0 | 0 |
| 1744047901 | 11.5 °C | 1025 hPa | 41 % | 0 | 0 |
| 1744047601 | 12 °C | 1025 hPa | 41 % | 0 | 0 |
| 1744047301 | 12 °C | 1025 hPa | 41 % | 0 | 0 |
| 1744047001 | 12 °C | 1025 hPa | 41 % | 0 | 0 |
| 1744046701 | 12 °C | 1025 hPa | 41 % | 0 | 0 |
*Used Equation Coefficients:
Temp: 0, 0.5, -40
Pres: 0, 1, 883
Humi: 0, 0.5, 0
Value4: 0, 1, 0
Value5: 0, 1, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)