APRS Track Direct

My position About ☰

reset

XE2J-1 Telemetry

This is the latest recevied telemetry packets stored in our database for station/object XE2J-1. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

<< 1 2 >>

Time	Vin*	Rx1h*	Dg1h*	Eff1h*
1786669959	11.4 Volt	120 Pkt	50 Pkt	77 Pcnt
1786669059	12.15 Volt	110 Pkt	50 Pkt	76 Pcnt
1786668159	12.23 Volt	120 Pkt	50 Pkt	77 Pcnt
1786667259	12.3 Volt	110 Pkt	50 Pkt	75 Pcnt
1786666359	12.3 Volt	110 Pkt	50 Pkt	75 Pcnt
1786665459	12.3 Volt	110 Pkt	50 Pkt	71 Pcnt
1786664559	12.38 Volt	110 Pkt	50 Pkt	72 Pcnt
1786663659	12.38 Volt	110 Pkt	50 Pkt	72 Pcnt
1786662759	12.45 Volt	110 Pkt	50 Pkt	75 Pcnt
1786661859	12.53 Volt	110 Pkt	60 Pkt	76 Pcnt
1786660959	12.53 Volt	120 Pkt	60 Pkt	78 Pcnt
1786660059	12.6 Volt	120 Pkt	60 Pkt	78 Pcnt
1786659159	12.53 Volt	130 Pkt	70 Pkt	83 Pcnt
1786658259	12.6 Volt	140 Pkt	80 Pkt	85 Pcnt
1786657359	12.68 Volt	140 Pkt	80 Pkt	86 Pcnt
1786656459	12.6 Volt	130 Pkt	70 Pkt	82 Pcnt
1786655559	12.6 Volt	120 Pkt	50 Pkt	77 Pcnt
1786654659	12.38 Volt	110 Pkt	40 Pkt	78 Pcnt
1786653759	12.75 Volt	110 Pkt	40 Pkt	77 Pcnt
1786652859	12.83 Volt	100 Pkt	30 Pkt	80 Pcnt
1786651959	12.75 Volt	110 Pkt	40 Pkt	83 Pcnt
1786651059	12.75 Volt	120 Pkt	40 Pkt	83 Pcnt
1786650159	12.75 Volt	110 Pkt	40 Pkt	82 Pcnt
1786649259	12.75 Volt	110 Pkt	40 Pkt	79 Pcnt
1786648359	12.83 Volt	110 Pkt	40 Pkt	76 Pcnt

*Used Equation Coefficients:

Vin: 0, 0.075, 0

Rx1h: 0, 10, 0

Dg1h: 0, 10, 0

Eff1h: 0, 1, 0

Temp: 0, 0, 0

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)