This is the latest recevied telemetry packets stored in our database for station/object IR2ZZN-2. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | Value1* | Value2* | Value3* | Value4* | Value5* |
|---|---|---|---|---|---|
| 1749298925 | 178 | 4 | 2 | 91 | 5 |
| 1749298625 | 178 | 4 | 2 | 89 | 7 |
| 1749298325 | 178 | 4 | 2 | 88 | 9 |
| 1749298025 | 178 | 4 | 2 | 86 | 13 |
| 1749297725 | 178 | 4 | 2 | 86 | 8 |
| 1749297425 | 178 | 3 | 2 | 84 | 6 |
| 1749297125 | 178 | 3 | 2 | 84 | 8 |
| 1749296825 | 178 | 3 | 2 | 84 | 5 |
| 1749296525 | 178 | 3 | 2 | 84 | 7 |
| 1749296225 | 178 | 3 | 2 | 82 | 8 |
| 1749295925 | 178 | 3 | 2 | 86 | 4 |
| 1749295625 | 178 | 4 | 2 | 82 | 4 |
| 1749295325 | 178 | 4 | 3 | 84 | 7 |
| 1749295025 | 178 | 4 | 3 | 85 | 8 |
| 1749294725 | 178 | 4 | 3 | 87 | 10 |
| 1749294425 | 178 | 5 | 3 | 86 | 8 |
| 1749294125 | 178 | 5 | 3 | 85 | 3 |
| 1749293825 | 178 | 5 | 3 | 80 | 4 |
| 1749293525 | 178 | 5 | 3 | 81 | 7 |
| 1749293225 | 178 | 5 | 3 | 80 | 5 |
| 1749292925 | 178 | 5 | 3 | 78 | 7 |
| 1749292625 | 178 | 5 | 3 | 79 | 12 |
| 1749292325 | 178 | 5 | 3 | 78 | 11 |
| 1749292025 | 178 | 4 | 3 | 81 | 6 |
| 1749291725 | 178 | 4 | 3 | 81 | 10 |
*Used Equation Coefficients:
Value1: 0, 1, 0
Value2: 0, 1, 0
Value3: 0, 1, 0
Value4: 0, 1, 0
Value5: 0, 1, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)