This is the latest recevied telemetry packets stored in our database for station/object IU1FIL-2. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | Value1* | Value2* | Value3* | Value4* | Value5* |
|---|---|---|---|---|---|
| 1732286397 | 12 | 0 | 12 | 210 | 0 |
| 1732285795 | 8 | 0 | 8 | 212 | 0 |
| 1732285194 | 8 | 0 | 8 | 213 | 0 |
| 1732284592 | 11 | 0 | 11 | 209 | 0 |
| 1732283991 | 15 | 0 | 15 | 199 | 0 |
| 1732283389 | 8 | 0 | 8 | 201 | 0 |
| 1732282788 | 13 | 0 | 13 | 200 | 0 |
| 1732282186 | 16 | 0 | 16 | 198 | 0 |
| 1732281584 | 10 | 0 | 10 | 199 | 0 |
| 1732280983 | 8 | 0 | 8 | 201 | 0 |
| 1732280382 | 7 | 0 | 7 | 198 | 0 |
| 1732279780 | 7 | 0 | 7 | 197 | 0 |
| 1732279178 | 15 | 0 | 15 | 210 | 0 |
| 1732278577 | 13 | 0 | 13 | 199 | 0 |
| 1732277976 | 9 | 0 | 9 | 199 | 0 |
| 1732277374 | 8 | 0 | 8 | 199 | 0 |
| 1732276772 | 18 | 0 | 18 | 198 | 0 |
| 1732276171 | 9 | 0 | 9 | 199 | 0 |
| 1732275569 | 10 | 0 | 10 | 198 | 0 |
| 1732274968 | 9 | 0 | 9 | 212 | 0 |
| 1732274366 | 6 | 0 | 6 | 212 | 0 |
| 1732273765 | 8 | 0 | 8 | 199 | 0 |
| 1732273163 | 9 | 0 | 9 | 199 | 0 |
| 1732272562 | 16 | 0 | 16 | 202 | 0 |
| 1732271960 | 28 | 0 | 28 | 201 | 0 |
*Used Equation Coefficients:
Value1: 0, 1, 0
Value2: 0, 1, 0
Value3: 0, 1, 0
Value4: 0, 1, 0
Value5: 0, 1, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)