APRS Track Direct

My position About ☰

reset

LU2DKV-10 Telemetry

This is the latest recevied telemetry packets stored in our database for station/object LU2DKV-10. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

<< 1 2 >>

Time	RxTraffic*	TxTraffic*	RxDrop*	RSSI*	Voltage*
1749329012	6 Pkt	38 Pkt	1 Pkt	-53 dBm	12.82 V
1749327189	6 Pkt	3 Pkt	0 Pkt	-53 dBm	12.45 V
1749325367	7 Pkt	8 Pkt	0 Pkt	-53 dBm	12.86 V
1749323544	7 Pkt	5 Pkt	0 Pkt	-51 dBm	12.49 V
1749321721	10 Pkt	1 Pkt	0 Pkt	-52 dBm	12.84 V
1749319899	5 Pkt	10 Pkt	0 Pkt	-53 dBm	12.41 V
1749318076	4 Pkt	3 Pkt	0 Pkt	-52 dBm	13.1 V
1749316253	9 Pkt	3 Pkt	0 Pkt	-53 dBm	12.65 V
1749314430	9 Pkt	14 Pkt	4 Pkt	-52 dBm	12.65 V
1749312608	7 Pkt	3 Pkt	0 Pkt	-51 dBm	12.9 V
1749310785	5 Pkt	7 Pkt	0 Pkt	-51 dBm	12.67 V
1749308963	11 Pkt	2 Pkt	0 Pkt	-52 dBm	12.86 V
1749308962	11 Pkt	2 Pkt	0 Pkt	-53 dBm	12.86 V
1749307139	4 Pkt	2 Pkt	0 Pkt	-51 dBm	12.82 V
1749305317	4 Pkt	4 Pkt	0 Pkt	-52 dBm	12.84 V
1749303495	15 Pkt	1 Pkt	0 Pkt	-52 dBm	12.84 V
1749301672	17 Pkt	2 Pkt	0 Pkt	-53 dBm	12.69 V
1749299849	12 Pkt	2 Pkt	0 Pkt	-57 dBm	12.76 V
1749298027	7 Pkt	1 Pkt	0 Pkt	-59 dBm	12.67 V
1749296204	5 Pkt	2 Pkt	0 Pkt	-58 dBm	12.92 V
1749294382	6 Pkt	1 Pkt	0 Pkt	-58 dBm	12.8 V
1749292559	17 Pkt	5 Pkt	0 Pkt	-58 dBm	12.98 V
1749290737	6 Pkt	2 Pkt	0 Pkt	-58 dBm	13.04 V
1749288914	9 Pkt	2 Pkt	0 Pkt	-57 dBm	12.65 V
1749287091	9 Pkt	2 Pkt	0 Pkt	-56 dBm	12.8 V

*Used Equation Coefficients:

RxTraffic: 0, 1, 0

TxTraffic: 0, 1, 0

RxDrop: 0, 1, 0

RSSI: 0, -1, 0

Voltage: 0, 1, 0

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)