This is the latest recevied telemetry packets stored in our database for station/object KQ6DI-12. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | Value1* | Value2* | Value3* | Value4* | Value5* |
|---|---|---|---|---|---|
| 1744133167 | 1348 | 2880 | 388 | 0 | 0 |
| 1744132867 | 1347 | 2898 | 390 | 0 | 0 |
| 1744132566 | 1345 | 2888 | 388 | 0 | 0 |
| 1744132267 | 1341 | 2754 | 369 | 0 | 0 |
| 1744131967 | 1342 | 2798 | 375 | 0 | 0 |
| 1744131667 | 1340 | 2725 | 365 | 0 | 0 |
| 1744131366 | 1340 | 2784 | 373 | 0 | 0 |
| 1744131067 | 1338 | 2758 | 369 | 0 | 0 |
| 1744130767 | 1335 | 2649 | 354 | 0 | 0 |
| 1744130467 | 1335 | 2695 | 360 | 0 | 0 |
| 1744130166 | 1332 | 2576 | 343 | 0 | 0 |
| 1744129867 | 1331 | 2546 | 339 | 0 | 0 |
| 1744129567 | 1329 | 2490 | 331 | 0 | 0 |
| 1744129267 | 1330 | 2496 | 332 | 0 | 0 |
| 1744128966 | 1328 | 2432 | 323 | 0 | 0 |
| 1744128667 | 1327 | 2404 | 319 | 0 | 0 |
| 1744128367 | 1324 | 2265 | 300 | 0 | 0 |
| 1744128067 | 1323 | 2234 | 296 | 0 | 0 |
| 1744127766 | 1321 | 2086 | 276 | 0 | 0 |
| 1744127467 | 1321 | 2234 | 295 | 0 | 0 |
| 1744127167 | 1319 | 2117 | 279 | 0 | 0 |
| 1744126867 | 1314 | 1864 | 245 | 0 | 0 |
| 1744126566 | 1313 | 1866 | 245 | 0 | 0 |
| 1744126267 | 1310 | 1807 | 237 | 0 | 0 |
| 1744125967 | 1308 | 1700 | 222 | 0 | 0 |
*Used Equation Coefficients:
Value1: 0, 1, 0
Value2: 0, 1, 0
Value3: 0, 1, 0
Value4: 0, 1, 0
Value5: 0, 1, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)