APRS Track Direct

My position About ☰

reset

2M0SBP-1 Telemetry

This is the latest recevied telemetry packets stored in our database for station/object 2M0SBP-1. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

<< 1 2 3 4 >>

Time	Vin*	V Raw*	DgR*	T-in*	T-out*
1732523516	12.38 Volt	13.5 Volt	76 Pcnt	-64 C	12.5 C
1732523216	12.38 Volt	13.5 Volt	76 Pcnt	-64 C	12.5 C
1732522916	12.38 Volt	13.5 Volt	76 Pcnt	-64 C	12.5 C
1732522616	12.38 Volt	13.5 Volt	76 Pcnt	-64 C	12.5 C
1732522316	12.38 Volt	13.5 Volt	76 Pcnt	-64 C	12.5 C
1732522016	12.38 Volt	13.5 Volt	76 Pcnt	-64 C	12.5 C
1732521716	12.38 Volt	13.5 Volt	76 Pcnt	-64 C	12.5 C
1732521416	12.38 Volt	13.5 Volt	76 Pcnt	-64 C	12.5 C
1732521116	12.38 Volt	13.5 Volt	76 Pcnt	-64 C	12.5 C
1732520816	12.38 Volt	13.5 Volt	76 Pcnt	-64 C	12.5 C
1732520516	12.38 Volt	13.5 Volt	76 Pcnt	-64 C	12.5 C
1732520216	12.38 Volt	13.5 Volt	76 Pcnt	-64 C	12.5 C
1732519916	12.38 Volt	13.5 Volt	76 Pcnt	-64 C	12.5 C
1732519616	12.38 Volt	13.5 Volt	76 Pcnt	-64 C	12.5 C
1732519316	12.38 Volt	13.5 Volt	76 Pcnt	-64 C	12.5 C
1732519016	12.38 Volt	13.5 Volt	76 Pcnt	-64 C	12.5 C
1732518716	12.38 Volt	13.5 Volt	76 Pcnt	-64 C	12.5 C
1732518416	12.38 Volt	13.5 Volt	76 Pcnt	-64 C	12.5 C
1732518116	12.38 Volt	13.5 Volt	76 Pcnt	-64 C	12.5 C
1732517816	12.38 Volt	13.5 Volt	76 Pcnt	-64 C	12.5 C
1732517516	12.38 Volt	13.5 Volt	76 Pcnt	-64 C	12.5 C
1732517216	12.38 Volt	13.5 Volt	76 Pcnt	-64 C	12.5 C
1732516916	12.38 Volt	13.5 Volt	76 Pcnt	-64 C	12.5 C
1732516616	12.38 Volt	13.5 Volt	76 Pcnt	-64 C	12.5 C
1732516316	12.38 Volt	13.5 Volt	76 Pcnt	-64 C	12.5 C

*Used Equation Coefficients:

Vin: 0, 0.075, 0

V Raw: 0, 0.1, 0

DgR: 0, 0.001, 0

T-in: 0, 0.5, -64

T-out: 0, 0.5, -64

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)