This is the latest recevied telemetry packets stored in our database for station/object KX4O-13. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
Time | Vin* | Rx10m* | Dg10m* | Eff1h* | DgR1h* |
---|---|---|---|---|---|
1718716192 | 0 Volt | 0 Pkt | 0 Pkt | 100 Pcnt | 0 Pcnt |
1718715892 | 0 Volt | 0 Pkt | 0 Pkt | 100 Pcnt | 0 Pcnt |
1718715592 | 0 Volt | 0 Pkt | 0 Pkt | 100 Pcnt | 0 Pcnt |
1718715292 | 0 Volt | 0 Pkt | 0 Pkt | 100 Pcnt | 0 Pcnt |
1718714992 | 0 Volt | 0 Pkt | 0 Pkt | 100 Pcnt | 0 Pcnt |
1718714692 | 0 Volt | 0 Pkt | 0 Pkt | 100 Pcnt | 0 Pcnt |
1718714392 | 0 Volt | 0 Pkt | 0 Pkt | 100 Pcnt | 0 Pcnt |
1718714092 | 0 Volt | 0 Pkt | 0 Pkt | 100 Pcnt | 0 Pcnt |
1718713792 | 0 Volt | 0 Pkt | 0 Pkt | 100 Pcnt | 0 Pcnt |
1718713492 | 0 Volt | 0 Pkt | 0 Pkt | 100 Pcnt | 0 Pcnt |
1718713192 | 0 Volt | 0 Pkt | 0 Pkt | 100 Pcnt | 0 Pcnt |
1718712892 | 0 Volt | 0 Pkt | 0 Pkt | 100 Pcnt | 0 Pcnt |
1718712592 | 0 Volt | 0 Pkt | 0 Pkt | 100 Pcnt | 0 Pcnt |
1718712292 | 0 Volt | 0 Pkt | 0 Pkt | 100 Pcnt | 0 Pcnt |
1718711992 | 0 Volt | 0 Pkt | 0 Pkt | 100 Pcnt | 0 Pcnt |
1718711692 | 0 Volt | 0 Pkt | 0 Pkt | 100 Pcnt | 0 Pcnt |
1718711392 | 0 Volt | 0 Pkt | 0 Pkt | 100 Pcnt | 0 Pcnt |
1718711092 | 0 Volt | 0 Pkt | 0 Pkt | 100 Pcnt | 0 Pcnt |
1718710792 | 0 Volt | 0 Pkt | 0 Pkt | 100 Pcnt | 0 Pcnt |
1718710492 | 0 Volt | 0 Pkt | 0 Pkt | 100 Pcnt | 0 Pcnt |
1718710192 | 0 Volt | 0 Pkt | 0 Pkt | 100 Pcnt | 0 Pcnt |
1718709892 | 0 Volt | 0 Pkt | 0 Pkt | 100 Pcnt | 0 Pcnt |
1718709592 | 0 Volt | 0 Pkt | 0 Pkt | 100 Pcnt | 0 Pcnt |
1718709292 | 0 Volt | 0 Pkt | 0 Pkt | 100 Pcnt | 0 Pcnt |
1718708992 | 0 Volt | 0 Pkt | 0 Pkt | 100 Pcnt | 0 Pcnt |
*Used Equation Coefficients:
Vin: 0, 0.075, 0
Rx10m: 0, 1, 0
Dg10m: 0, 1, 0
Eff1h: 0, 1, 0
DgR1h: 0, 0.001, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)