APRS Track Direct

My position About ☰

reset

EA5IHI-13 Telemetry

This is the latest recevied telemetry packets stored in our database for station/object EA5IHI-13. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

<< 1 2 3 4 >>

Time	TxTraffic*	RSSI*	Voltage*
1749329262	0 Pkt	-65 dBm	0.18 V
1749328940	0 Pkt	-65 dBm	0.18 V
1749328618	1 Pkt	-65 dBm	0.27 V
1749328296	0 Pkt	-65 dBm	0.16 V
1749327974	0 Pkt	-64 dBm	0.18 V
1749327654	0 Pkt	-65 dBm	0.27 V
1749327330	0 Pkt	-68 dBm	0.35 V
1749327008	0 Pkt	-69 dBm	0.18 V
1749326686	0 Pkt	-68 dBm	0.1 V
1749326364	0 Pkt	-72 dBm	0.1 V
1749326043	0 Pkt	-69 dBm	0.18 V
1749325721	0 Pkt	-74 dBm	0.18 V
1749325398	0 Pkt	-67 dBm	0.18 V
1749325077	0 Pkt	-63 dBm	0.21 V
1749324754	0 Pkt	-65 dBm	0.27 V
1749324432	0 Pkt	-68 dBm	0.25 V
1749324110	0 Pkt	-66 dBm	0.25 V
1749323788	0 Pkt	-64 dBm	0.25 V
1749323466	0 Pkt	-65 dBm	0.25 V
1749323146	0 Pkt	-64 dBm	0.18 V
1749322822	0 Pkt	-67 dBm	0.25 V
1749322500	1 Pkt	-65 dBm	0.27 V
1749322178	0 Pkt	-65 dBm	0.35 V
1749321857	1 Pkt	-65 dBm	0.37 V
1749321534	0 Pkt	-63 dBm	0.25 V

*Used Equation Coefficients:

RxTraffic: 0, 1, 0

TxTraffic: 0, 1, 0

RxDrop: 0, 1, 0

RSSI: 0, -1, 0

Voltage: 0, 1, 0

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)