APRS Track Direct

My position About ☰

reset

BORING Telemetry

This is the latest recevied telemetry packets stored in our database for station/object BORING. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

Time	Vin*	Rx1h*	Dg1h*	Dgrx1h*
1732551374	12.6 Volt	470 Pkt	190 Pkt	396650 Pkt
1732550178	12.6 Volt	470 Pkt	170 Pkt	378430 Pkt
1732550174	12.6 Volt	470 Pkt	170 Pkt	378430 Pkt
1732548974	12.6 Volt	460 Pkt	180 Pkt	394840 Pkt
1732547774	12.6 Volt	490 Pkt	200 Pkt	406060 Pkt
1732546580	12.6 Volt	490 Pkt	190 Pkt	396790 Pkt
1732546574	12.6 Volt	490 Pkt	190 Pkt	396790 Pkt
1732545374	12.6 Volt	470 Pkt	170 Pkt	372090 Pkt
1732544174	12.6 Volt	420 Pkt	140 Pkt	344260 Pkt
1732542980	12.6 Volt	420 Pkt	140 Pkt	337990 Pkt
1732542974	12.6 Volt	420 Pkt	140 Pkt	337990 Pkt
1732541774	12.6 Volt	420 Pkt	130 Pkt	330950 Pkt
1732540574	12.6 Volt	430 Pkt	130 Pkt	306260 Pkt
1732539380	12.6 Volt	410 Pkt	120 Pkt	288780 Pkt
1732539374	12.6 Volt	410 Pkt	120 Pkt	288780 Pkt
1732538174	12.6 Volt	420 Pkt	110 Pkt	268400 Pkt
1732536974	12.6 Volt	420 Pkt	100 Pkt	257140 Pkt
1732535779	12.6 Volt	420 Pkt	110 Pkt	264280 Pkt
1732535774	12.6 Volt	420 Pkt	110 Pkt	264280 Pkt
1732534575	12.6 Volt	400 Pkt	100 Pkt	252500 Pkt
1732533375	12.6 Volt	390 Pkt	100 Pkt	267170 Pkt
1732532177	12.6 Volt	400 Pkt	110 Pkt	280090 Pkt
1732532174	12.6 Volt	400 Pkt	110 Pkt	280090 Pkt
1732530975	12.6 Volt	410 Pkt	110 Pkt	273170 Pkt
1732529775	12.6 Volt	400 Pkt	100 Pkt	257350 Pkt

*Used Equation Coefficients:

Vin: 0, 0.075, 0

Rx1h: 0, 10, 0

Dg1h: 0, 10, 0

Dgrx1h: 0, 10, 0

A5: 0, 0, 0

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)