This is the latest recevied telemetry packets stored in our database for station/object SR5RAD-10. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | Value1* | Value2* | Value3* | Value4* | Value5* |
|---|---|---|---|---|---|
| 1745034967 | 220 | 1 | 125 | 0 | 0 |
| 1745034848 | 220 | 1 | 125 | 0 | 0 |
| 1745034728 | 220 | 1 | 125 | 0 | 0 |
| 1745034608 | 210 | 1 | 125 | 0 | 0 |
| 1745034507 | 210 | 1 | 125 | 0 | 0 |
| 1745034377 | 220 | 1 | 125 | 0 | 0 |
| 1745034248 | 210 | 1 | 126 | 0 | 0 |
| 1745034122 | 210 | 1 | 126 | 0 | 0 |
| 1745034008 | 220 | 1 | 126 | 0 | 0 |
| 1745033888 | 220 | 1 | 127 | 0 | 0 |
| 1745033763 | 210 | 1 | 128 | 0 | 0 |
| 1745033648 | 220 | 1 | 128 | 0 | 0 |
| 1745033527 | 220 | 1 | 128 | 0 | 0 |
| 1745033403 | 220 | 1 | 129 | 0 | 0 |
| 1745033302 | 220 | 1 | 130 | 0 | 0 |
| 1745033162 | 220 | 1 | 130 | 0 | 0 |
| 1745033042 | 220 | 1 | 131 | 0 | 0 |
| 1745032928 | 220 | 1 | 131 | 0 | 0 |
| 1745032807 | 220 | 1 | 132 | 0 | 0 |
| 1745032688 | 220 | 1 | 133 | 0 | 0 |
| 1745032568 | 230 | 1 | 133 | 0 | 0 |
| 1745032448 | 230 | 1 | 134 | 0 | 0 |
| 1745032328 | 230 | 1 | 134 | 0 | 0 |
| 1745032207 | 230 | 1 | 135 | 0 | 0 |
| 1745032106 | 230 | 1 | 135 | 0 | 0 |
*Used Equation Coefficients:
Value1: 0, 1, 0
Value2: 0, 1, 0
Value3: 0, 1, 0
Value4: 0, 1, 0
Value5: 0, 1, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)