This is the latest recevied telemetry packets stored in our database for station/object SR4X-10. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | Value1* | Value2* | Value3* | Value4* | Value5* |
|---|---|---|---|---|---|
| 1732309923 | 420 | 1 | 311 | 0 | 0 |
| 1732309802 | 410 | 1 | 311 | 0 | 0 |
| 1732309683 | 360 | 1 | 304 | 0 | 0 |
| 1732309563 | 350 | 1 | 313 | 0 | 0 |
| 1732309445 | 350 | 1 | 328 | 0 | 0 |
| 1732309325 | 370 | 1 | 341 | 0 | 0 |
| 1732309207 | 430 | 1 | 330 | 0 | 0 |
| 1732309083 | 480 | 1 | 321 | 0 | 0 |
| 1732308962 | 470 | 1 | 321 | 0 | 0 |
| 1732308843 | 470 | 1 | 320 | 0 | 0 |
| 1732308723 | 470 | 1 | 321 | 0 | 0 |
| 1732308602 | 480 | 1 | 318 | 0 | 0 |
| 1732308483 | 470 | 1 | 318 | 0 | 0 |
| 1732308363 | 470 | 1 | 317 | 0 | 0 |
| 1732308246 | 470 | 1 | 316 | 0 | 0 |
| 1732308126 | 470 | 1 | 315 | 0 | 0 |
| 1732308002 | 470 | 1 | 315 | 0 | 0 |
| 1732307883 | 470 | 1 | 313 | 0 | 0 |
| 1732307763 | 470 | 1 | 311 | 0 | 0 |
| 1732307642 | 470 | 1 | 311 | 0 | 0 |
| 1732307523 | 460 | 1 | 310 | 0 | 0 |
| 1732307403 | 470 | 1 | 310 | 0 | 0 |
| 1732307282 | 460 | 1 | 309 | 0 | 0 |
| 1732307163 | 450 | 1 | 308 | 0 | 0 |
| 1732307043 | 440 | 1 | 306 | 0 | 0 |
*Used Equation Coefficients:
Value1: 0, 1, 0
Value2: 0, 1, 0
Value3: 0, 1, 0
Value4: 0, 1, 0
Value5: 0, 1, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)