APRS Track Direct

My position About ☰

reset

TA1KRB-10 Telemetry

This is the latest recevied telemetry packets stored in our database for station/object TA1KRB-10. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

<< 1 2 >>

Time	RxTraffic*	RxDrop*	RSSI*	Voltage*
1780341628	4 Pkt	0 Pkt	-27 dBm	8.94 V
1780340838	3 Pkt	0 Pkt	-27 dBm	8.94 V
1780340048	4 Pkt	0 Pkt	-27 dBm	8.94 V
1780339258	8 Pkt	1 Pkt	-26 dBm	8.94 V
1780338468	32 Pkt	4 Pkt	-27 dBm	8.94 V
1780337677	65 Pkt	3 Pkt	-27 dBm	8.94 V
1780336887	38 Pkt	2 Pkt	-27 dBm	8.94 V
1780336098	29 Pkt	2 Pkt	-27 dBm	8.94 V
1780335307	18 Pkt	1 Pkt	-26 dBm	8.92 V
1780334517	15 Pkt	1 Pkt	-27 dBm	8.96 V
1780333727	12 Pkt	1 Pkt	-26 dBm	8.94 V
1780332937	9 Pkt	0 Pkt	-28 dBm	8.94 V
1780332147	7 Pkt	0 Pkt	-31 dBm	8.94 V
1780331357	17 Pkt	1 Pkt	-27 dBm	8.96 V
1780330567	15 Pkt	0 Pkt	-28 dBm	8.96 V
1780329777	5 Pkt	0 Pkt	-29 dBm	8.96 V
1780328987	7 Pkt	0 Pkt	-24 dBm	8.92 V
1780328197	28 Pkt	3 Pkt	-26 dBm	8.94 V
1780327407	13 Pkt	0 Pkt	-27 dBm	8.96 V
1780326617	21 Pkt	1 Pkt	-26 dBm	8.94 V
1780325827	89 Pkt	10 Pkt	-27 dBm	8.96 V
1780325037	79 Pkt	6 Pkt	-26 dBm	8.94 V
1780324247	83 Pkt	9 Pkt	-27 dBm	8.94 V
1780323457	91 Pkt	9 Pkt	-25 dBm	8.94 V
1780322667	98 Pkt	11 Pkt	-27 dBm	8.92 V

*Used Equation Coefficients:

RxTraffic: 0, 1, 0

TxTraffic: 0, 1, 0

RxDrop: 0, 1, 0

RSSI: 0, -1, 0

Voltage: 0, 1, 0

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)