APRS Track Direct

My position About ☰

reset

YH0DVR-1 Telemetry

This is the latest recevied telemetry packets stored in our database for station/object YH0DVR-1. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

<< 1 2 >>

Time	RxTraffic*	RxDrop*	RSSI*	Voltage*
1732289912	14 Pkt	3 Pkt	31 dBm	13.9 V
1732289540	25 Pkt	1 Pkt	31 dBm	13.9 V
1732289167	28 Pkt	1 Pkt	31 dBm	13.88 V
1732288794	19 Pkt	2 Pkt	31 dBm	13.88 V
1732288422	24 Pkt	0 Pkt	31 dBm	13.88 V
1732288048	28 Pkt	2 Pkt	31 dBm	13.88 V
1732287280	24 Pkt	3 Pkt	31 dBm	13.86 V
1732286908	23 Pkt	3 Pkt	31 dBm	13.88 V
1732286534	27 Pkt	1 Pkt	31 dBm	13.88 V
1732286161	28 Pkt	1 Pkt	31 dBm	13.88 V
1732285788	23 Pkt	1 Pkt	31 dBm	13.88 V
1732285415	22 Pkt	1 Pkt	31 dBm	13.88 V
1732285042	23 Pkt	3 Pkt	31 dBm	13.88 V
1732284276	20 Pkt	1 Pkt	31 dBm	13.88 V
1732283901	20 Pkt	2 Pkt	31 dBm	13.88 V
1732283528	18 Pkt	3 Pkt	31 dBm	13.88 V
1732283155	19 Pkt	2 Pkt	31 dBm	13.88 V
1732282783	21 Pkt	3 Pkt	31 dBm	13.88 V
1732282410	17 Pkt	2 Pkt	31 dBm	13.88 V
1732282037	24 Pkt	3 Pkt	31 dBm	13.9 V
1732280896	27 Pkt	3 Pkt	31 dBm	13.9 V
1732280523	19 Pkt	2 Pkt	31 dBm	13.9 V
1732280149	26 Pkt	1 Pkt	31 dBm	13.9 V
1732279775	17 Pkt	2 Pkt	31 dBm	13.9 V
1732279402	25 Pkt	0 Pkt	31 dBm	13.9 V

*Used Equation Coefficients:

RxTraffic: 0, 1, 0

TxTraffic: 0, 1, 0

RxDrop: 0, 1, 0

RSSI: 0, -1, 0

Voltage: 0, 1, 0

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)