APRS Track Direct

My position About ☰

reset

DJ9ZZZ-10 Telemetry

This is the latest recevied telemetry packets stored in our database for station/object DJ9ZZZ-10. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

<< 1 2 3 4 >>

Time	Vin*	Rx1h*	Eff1h*	Temp*
1732462045	12.15 Volt	400 Pkt	79 Pcnt	-64 C
1732461745	12.23 Volt	420 Pkt	80 Pcnt	-64 C
1732461445	12.23 Volt	420 Pkt	81 Pcnt	-64 C
1732461145	12.15 Volt	420 Pkt	82 Pcnt	-64 C
1732460844	12.23 Volt	430 Pkt	82 Pcnt	-64 C
1732460544	12.23 Volt	420 Pkt	82 Pcnt	-64 C
1732460244	12.15 Volt	430 Pkt	82 Pcnt	-64 C
1732459943	12.15 Volt	430 Pkt	83 Pcnt	-64 C
1732459643	12.23 Volt	440 Pkt	83 Pcnt	-64 C
1732459343	12.23 Volt	440 Pkt	83 Pcnt	-64 C
1732459043	12.23 Volt	430 Pkt	84 Pcnt	-64 C
1732458742	12.15 Volt	430 Pkt	84 Pcnt	-64 C
1732458442	12.15 Volt	420 Pkt	84 Pcnt	-64 C
1732458142	12.23 Volt	410 Pkt	84 Pcnt	-64 C
1732457841	12.15 Volt	410 Pkt	83 Pcnt	-64 C
1732457541	12.15 Volt	400 Pkt	83 Pcnt	-64 C
1732457241	12.23 Volt	390 Pkt	82 Pcnt	-64 C
1732456940	12.15 Volt	390 Pkt	83 Pcnt	-64 C
1732456640	12.15 Volt	380 Pkt	82 Pcnt	-64 C
1732456340	12.15 Volt	380 Pkt	81 Pcnt	-64 C
1732456040	12.23 Volt	370 Pkt	82 Pcnt	-64 C
1732455139	12.15 Volt	370 Pkt	83 Pcnt	-64 C
1732454839	12.23 Volt	370 Pkt	82 Pcnt	-64 C
1732454538	12.23 Volt	370 Pkt	82 Pcnt	-64 C
1732454238	12.23 Volt	380 Pkt	82 Pcnt	-64 C

*Used Equation Coefficients:

Vin: 0, 0.075, 0

Rx1h: 0, 10, 0

Dg1h: 0, 10, 0

Eff1h: 0, 1, 0

Temp: 0, 0.5, -64

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)