This is the latest recevied telemetry packets stored in our database for station/object SR6RC. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | Temperatura CPU* | Obciazenie CPU* | Value3* | Value4* | Value5* |
|---|---|---|---|---|---|
| 1766362204 | 42 Deg.C | 3 % | 0 | 0 | 0 |
| 1766361601 | 41 Deg.C | 2 % | 0 | 0 | 0 |
| 1766361004 | 39 Deg.C | 2 % | 0 | 0 | 0 |
| 1766360401 | 38 Deg.C | 3 % | 0 | 0 | 0 |
| 1766359804 | 41 Deg.C | 3 % | 0 | 0 | 0 |
| 1766359201 | 40 Deg.C | 3 % | 0 | 0 | 0 |
| 1766358601 | 39 Deg.C | 3 % | 0 | 0 | 0 |
| 1766358005 | 38 Deg.C | 3 % | 0 | 0 | 0 |
| 1766357402 | 41 Deg.C | 3 % | 0 | 0 | 0 |
| 1766356805 | 40 Deg.C | 3 % | 0 | 0 | 0 |
| 1766356202 | 37 Deg.C | 3 % | 0 | 0 | 0 |
| 1766355605 | 43 Deg.C | 3 % | 0 | 0 | 0 |
| 1766355001 | 40 Deg.C | 3 % | 0 | 0 | 0 |
| 1766354402 | 36 Deg.C | 3 % | 0 | 0 | 0 |
| 1766353804 | 42 Deg.C | 3 % | 0 | 0 | 0 |
| 1766353201 | 40 Deg.C | 3 % | 0 | 0 | 0 |
| 1766352605 | 43 Deg.C | 3 % | 0 | 0 | 0 |
| 1766352001 | 40 Deg.C | 3 % | 0 | 0 | 0 |
| 1766351404 | 38 Deg.C | 4 % | 0 | 0 | 0 |
| 1766350801 | 42 Deg.C | 4 % | 0 | 0 | 0 |
| 1766350202 | 38 Deg.C | 7 % | 0 | 0 | 0 |
| 1766349892 | 35 Deg.C | 35 % | 0 | 0 | 0 |
| 1766346601 | 39 Deg.C | 2 % | 0 | 0 | 0 |
| 1766346004 | 41 Deg.C | 2 % | 0 | 0 | 0 |
| 1766345402 | 39 Deg.C | 2 % | 0 | 0 | 0 |
*Used Equation Coefficients:
Temperatura CPU: 0, 0.1, 0
Obciazenie CPU: 0, 1, 0
Value3: 0, 0, 0
Value4: 0, 0, 0
Value5: 0, 0, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)