This is the latest recevied telemetry packets stored in our database for station/object W4PJZ-9. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | Batt* | Temp* | Value3* | Value4* | Value5* |
|---|---|---|---|---|---|
| 1782522126 | 13.42 V | 102.65 Deg.F | 0 | 0 | 0 |
| 1782521994 | 13.36 V | 100.89 Deg.F | 0 | 0 | 0 |
| 1782521481 | 13.39 V | 101.77 Deg.F | 0 | 0 | 0 |
| 1782521219 | 13.45 V | 100.89 Deg.F | 0 | 0 | 0 |
| 1782521191 | 13.51 V | 100.01 Deg.F | 0 | 0 | 0 |
| 1782521186 | 13.45 V | 100.01 Deg.F | 0 | 0 | 0 |
| 1782521142 | 13.51 V | 99.13 Deg.F | 0 | 0 | 0 |
| 1782521110 | 13.54 V | 97.37 Deg.F | 0 | 0 | 0 |
| 1782517012 | 13.33 V | 102.65 Deg.F | 0 | 0 | 0 |
| 1782517004 | 13.33 V | 102.65 Deg.F | 0 | 0 | 0 |
| 1782516997 | 13.33 V | 102.65 Deg.F | 0 | 0 | 0 |
| 1782516993 | 13.36 V | 102.65 Deg.F | 0 | 0 | 0 |
| 1782516956 | 13.36 V | 101.77 Deg.F | 0 | 0 | 0 |
| 1782516460 | 13.45 V | 104.41 Deg.F | 0 | 0 | 0 |
| 1782516402 | 13.48 V | 102.65 Deg.F | 0 | 0 | 0 |
| 1782516365 | 13.45 V | 102.65 Deg.F | 0 | 0 | 0 |
| 1782516290 | 13.42 V | 100.89 Deg.F | 0 | 0 | 0 |
| 1782516286 | 13.33 V | 100.89 Deg.F | 0 | 0 | 0 |
| 1782511818 | 13.36 V | 107.05 Deg.F | 0 | 0 | 0 |
| 1782511632 | 13.36 V | 108.81 Deg.F | 0 | 0 | 0 |
| 1782511609 | 13.36 V | 108.81 Deg.F | 0 | 0 | 0 |
| 1782511593 | 13.39 V | 107.93 Deg.F | 0 | 0 | 0 |
| 1782511584 | 13.36 V | 107.05 Deg.F | 0 | 0 | 0 |
| 1782511580 | 13.39 V | 106.17 Deg.F | 0 | 0 | 0 |
| 1782511574 | 13.33 V | 106.17 Deg.F | 0 | 0 | 0 |
*Used Equation Coefficients:
Batt: 0, 0.0293, 0
Temp: 0, 0.88, -459.67
Value3: 0, 1, 0
Value4: 0, 1, 0
Value5: 0, 1, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)