APRS Track Direct

My position About ☰

reset

YH3AJS-1 Telemetry

This is the latest recevied telemetry packets stored in our database for station/object YH3AJS-1. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

<< 1 2 >>

Time	RxTraffic*	TxTraffic*	RxDrop*	RSSI*	Voltage*
1758235638	55 Pkt	2 Pkt	0 Pkt	-47 dBm	13.41 V
1758233813	64 Pkt	2 Pkt	0 Pkt	-48 dBm	13.45 V
1758231986	8 Pkt	0 Pkt	0 Pkt	-47 dBm	13.49 V
1758231985	8 Pkt	0 Pkt	0 Pkt	-48 dBm	13.49 V
1758230091	51 Pkt	4 Pkt	0 Pkt	-49 dBm	13.47 V
1758228262	68 Pkt	7 Pkt	0 Pkt	-50 dBm	13.43 V
1758226431	70 Pkt	6 Pkt	0 Pkt	-49 dBm	13.41 V
1758224598	72 Pkt	7 Pkt	0 Pkt	-48 dBm	13.43 V
1758222767	64 Pkt	8 Pkt	0 Pkt	-49 dBm	13.47 V
1758220933	53 Pkt	3 Pkt	0 Pkt	-46 dBm	13.43 V
1758219104	60 Pkt	2 Pkt	0 Pkt	-47 dBm	13.49 V
1758217277	53 Pkt	2 Pkt	0 Pkt	-47 dBm	13.49 V
1758215451	53 Pkt	2 Pkt	0 Pkt	-46 dBm	13.45 V
1758213624	55 Pkt	2 Pkt	0 Pkt	-47 dBm	13.41 V
1758211797	51 Pkt	1 Pkt	1 Pkt	-48 dBm	13.47 V
1758209972	1 Pkt	0 Pkt	0 Pkt	-47 dBm	13.41 V
1758208075	36 Pkt	2 Pkt	0 Pkt	-46 dBm	13.49 V
1758208075	36 Pkt	2 Pkt	0 Pkt	-48 dBm	13.49 V
1758206249	40 Pkt	2 Pkt	0 Pkt	-46 dBm	13.43 V
1758204423	47 Pkt	2 Pkt	9 Pkt	-47 dBm	13.47 V
1758202597	48 Pkt	2 Pkt	0 Pkt	-48 dBm	13.47 V
1758200771	44 Pkt	2 Pkt	0 Pkt	-48 dBm	13.49 V
1758198946	49 Pkt	2 Pkt	0 Pkt	-47 dBm	13.49 V
1758197119	43 Pkt	2 Pkt	0 Pkt	-52 dBm	13.43 V
1758195293	61 Pkt	2 Pkt	0 Pkt	-46 dBm	13.47 V

*Used Equation Coefficients:

RxTraffic: 0, 1, 0

TxTraffic: 0, 1, 0

RxDrop: 0, 1, 0

RSSI: 0, -1, 0

Voltage: 0, 1, 0

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)