This is the latest recevied telemetry packets stored in our database for station/object SR9SRC-2. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | TX* | RX* | Digi* | V_Bat* | V_Ext* |
|---|---|---|---|---|---|
| 1836274338 | 0 Count | 774 Count | 0 Count | 0 VDC | 0 VDC |
| 1836274188 | 0 Count | 795 Count | 0 Count | 0 VDC | 0 VDC |
| 1774081411 | 0 Count | 869 Count | 0 Count | 0 VDC | 0 VDC |
| 1774080811 | 0 Count | 847 Count | 0 Count | 0 VDC | 0 VDC |
| 1774080210 | 0 Count | 825 Count | 0 Count | 0 VDC | 0 VDC |
| 1774079610 | 0 Count | 803 Count | 0 Count | 0 VDC | 0 VDC |
| 1774079010 | 0 Count | 789 Count | 0 Count | 0 VDC | 0 VDC |
| 1774078410 | 0 Count | 775 Count | 0 Count | 0 VDC | 0 VDC |
| 1774077810 | 0 Count | 762 Count | 0 Count | 0 VDC | 0 VDC |
| 1774077210 | 0 Count | 743 Count | 0 Count | 0 VDC | 0 VDC |
| 1774076610 | 0 Count | 730 Count | 0 Count | 0 VDC | 0 VDC |
| 1774076010 | 0 Count | 714 Count | 0 Count | 0 VDC | 0 VDC |
| 1774075410 | 0 Count | 694 Count | 0 Count | 0 VDC | 0 VDC |
| 1774074810 | 0 Count | 687 Count | 0 Count | 0 VDC | 0 VDC |
| 1774074210 | 0 Count | 676 Count | 0 Count | 0 VDC | 0 VDC |
| 1774073610 | 0 Count | 660 Count | 0 Count | 0 VDC | 0 VDC |
| 1774073009 | 0 Count | 644 Count | 0 Count | 0 VDC | 0 VDC |
| 1774072409 | 0 Count | 634 Count | 0 Count | 0 VDC | 0 VDC |
| 1774071809 | 0 Count | 619 Count | 0 Count | 0 VDC | 0 VDC |
| 1774071209 | 0 Count | 602 Count | 0 Count | 0 VDC | 0 VDC |
| 1774070609 | 0 Count | 591 Count | 0 Count | 0 VDC | 0 VDC |
| 1774070009 | 0 Count | 574 Count | 0 Count | 0 VDC | 0 VDC |
| 1774069409 | 0 Count | 560 Count | 0 Count | 0 VDC | 0 VDC |
| 1774068809 | 0 Count | 549 Count | 0 Count | 0 VDC | 0 VDC |
| 1774068209 | 0 Count | 536 Count | 0 Count | 0 VDC | 0 VDC |
*Used Equation Coefficients:
TX: 0, 1, 0
RX: 0, 1, 0
Digi: 0, 1, 0
V_Bat: 0, 0.01, 0
V_Ext: 0, 0.02, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)