APRS Track Direct

My position About ☰

reset

HS6AZ Telemetry

This is the latest recevied telemetry packets stored in our database for station/object HS6AZ. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

<< 1 2 3 4 >>

Time	PM1.0*	PM2.5*	PM10*	RSSI*	Voltage*
1836274668	9 ug/m3	10 ug/m3	10 ug/m3	-30 dBm	5.04 V
1836274562	9 ug/m3	9 ug/m3	9 ug/m3	-31 dBm	4.35 V
1836274346	10 ug/m3	11 ug/m3	11 ug/m3	-36 dBm	4.94 V
1836274240	8 ug/m3	9 ug/m3	9 ug/m3	-31 dBm	4.72 V
1836274024	11 ug/m3	12 ug/m3	12 ug/m3	-37 dBm	5.33 V
1766135715	358 ug/m3	376 ug/m3	377 ug/m3	-71 dBm	21 V
1766135393	358 ug/m3	376 ug/m3	377 ug/m3	-68 dBm	21 V
1766135071	358 ug/m3	376 ug/m3	377 ug/m3	-69 dBm	21 V
1766134749	358 ug/m3	376 ug/m3	377 ug/m3	-67 dBm	21 V
1766134427	358 ug/m3	376 ug/m3	377 ug/m3	-66 dBm	21 V
1766134105	358 ug/m3	376 ug/m3	377 ug/m3	-71 dBm	21 V
1766133783	358 ug/m3	376 ug/m3	377 ug/m3	-66 dBm	21 V
1766133461	358 ug/m3	376 ug/m3	377 ug/m3	-70 dBm	21 V
1766133139	358 ug/m3	376 ug/m3	377 ug/m3	-67 dBm	21 V
1766132817	358 ug/m3	376 ug/m3	377 ug/m3	-67 dBm	21 V
1766132495	358 ug/m3	376 ug/m3	377 ug/m3	-67 dBm	21 V
1766132173	358 ug/m3	376 ug/m3	377 ug/m3	-67 dBm	21 V
1766131851	31 ug/m3	46 ug/m3	55 ug/m3	-68 dBm	21 V
1766131529	33 ug/m3	44 ug/m3	53 ug/m3	-69 dBm	21 V
1766131192	33 ug/m3	46 ug/m3	54 ug/m3	-67 dBm	21 V
1766131072	35 ug/m3	49 ug/m3	60 ug/m3	-70 dBm	21 V
1766130750	34 ug/m3	46 ug/m3	56 ug/m3	-65 dBm	21 V
1766130413	31 ug/m3	44 ug/m3	52 ug/m3	-66 dBm	21 V
1766130065	32 ug/m3	46 ug/m3	55 ug/m3	-68 dBm	21 V
1766129743	40 ug/m3	51 ug/m3	62 ug/m3	-68 dBm	21 V

*Used Equation Coefficients:

PM1.0: 0, 1, 0

PM2.5: 0, 1, 0

PM10: 0, 1, 0

RSSI: 0, -1, 0

Voltage: 0, 1, 0

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)