This is the latest recevied telemetry packets stored in our database for station/object DL3SH-12. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | Press* | Temp.in* | Hum* | QNH* | Temp.out* |
|---|---|---|---|---|---|
| 1758194707 | 922.3 hPa | 25.9 C deg | 32.9 % | 1024.7 hPa | 0 C deg |
| 1758192909 | 922.5 hPa | 24.9 C deg | 33 % | 1025.3 hPa | 0 C deg |
| 1758191107 | 921.3 hPa | 23.1 C deg | 35.4 % | 1024.7 hPa | 0 C deg |
| 1758189307 | 922.7 hPa | 23.2 C deg | 38.3 % | 1026.1 hPa | 0 C deg |
| 1758187507 | 922.7 hPa | 22.6 C deg | 39.6 % | 1026.3 hPa | 0 C deg |
| 1758185707 | 922.2 hPa | 21.6 C deg | 40 % | 1026.2 hPa | 0 C deg |
| 1758183916 | 922.5 hPa | 21.9 C deg | 38.4 % | 1026.4 hPa | 0 C deg |
| 1758182107 | 922.1 hPa | 21.8 C deg | 40.4 % | 1026 hPa | 0 C deg |
| 1758180307 | 922.1 hPa | 19.9 C deg | 45 % | 1026.7 hPa | 0 C deg |
| 1758178515 | 921 hPa | 16.9 C deg | 46.9 % | 1026.7 hPa | 0 C deg |
| 1758176707 | 922.2 hPa | 18.2 C deg | 39.4 % | 1027.5 hPa | 0 C deg |
| 1758174913 | 922 hPa | 18.4 C deg | 39.3 % | 1027.2 hPa | 0 C deg |
| 1758173109 | 920.9 hPa | 17.7 C deg | 38.5 % | 1026.2 hPa | 0 C deg |
| 1758171315 | 922 hPa | 18.5 C deg | 38.7 % | 1027.2 hPa | 0 C deg |
| 1758135315 | 921.4 hPa | 20.2 C deg | 39.9 % | 1025.9 hPa | 0 C deg |
*Used Equation Coefficients:
Press: 0, 1, 0
Temp.in: 0, 1, 0
Hum: 0, 1, 0
QNH: 0, 1, 0
Temp.out: 0, 1, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)