APRS Track Direct

My position About ☰

reset

IR2ZYL Telemetry

This is the latest recevied telemetry packets stored in our database for station/object IR2ZYL. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

<< 1 2 3 4 >>

Time	Temp*	Rx1h*	Dg10m*	Eff1h*
1782499504	41.5 C	380 Pkt	0 Pkt	68 Pcnt
1782499204	41.5 C	390 Pkt	0 Pkt	68 Pcnt
1782498904	41.5 C	390 Pkt	0 Pkt	69 Pcnt
1782498603	41.5 C	400 Pkt	0 Pkt	70 Pcnt
1782498303	42 C	410 Pkt	0 Pkt	70 Pcnt
1782498003	42 C	420 Pkt	0 Pkt	70 Pcnt
1782497702	42 C	420 Pkt	0 Pkt	70 Pcnt
1782497403	41.5 C	410 Pkt	0 Pkt	69 Pcnt
1782497102	42 C	400 Pkt	1 Pkt	68 Pcnt
1782496801	42 C	390 Pkt	1 Pkt	68 Pcnt
1782496501	42 C	390 Pkt	0 Pkt	68 Pcnt
1782496201	42 C	370 Pkt	0 Pkt	66 Pcnt
1782495901	42 C	370 Pkt	0 Pkt	67 Pcnt
1782495600	42 C	370 Pkt	0 Pkt	66 Pcnt
1782495300	42 C	370 Pkt	1 Pkt	65 Pcnt
1782495000	42 C	360 Pkt	1 Pkt	64 Pcnt
1782494699	42 C	360 Pkt	0 Pkt	64 Pcnt
1782494399	42 C	350 Pkt	0 Pkt	64 Pcnt
1782494099	42.5 C	360 Pkt	0 Pkt	65 Pcnt
1782493799	42.5 C	360 Pkt	0 Pkt	66 Pcnt
1782493498	42.5 C	380 Pkt	1 Pkt	67 Pcnt
1782493198	42.5 C	390 Pkt	1 Pkt	68 Pcnt
1782492898	42.5 C	400 Pkt	0 Pkt	68 Pcnt
1782492597	42.5 C	410 Pkt	0 Pkt	70 Pcnt
1782492297	42.5 C	400 Pkt	0 Pkt	69 Pcnt

*Used Equation Coefficients:

Temp: 0, 0.5, -64

Rx1h: 0, 10, 0

Dg10m: 0, 1, 0

Dg1h: 0, 10, 0

Eff1h: 0, 1, 0

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)