This is the latest recevied telemetry packets stored in our database for station/object SP6RSP-7. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | V_Bat* | V_Ext* | Value3* | Value4* | Value5* |
|---|---|---|---|---|---|
| 1780139428 | 398 VDC | 0 VDC | 0 | 0 | 0 |
| 1780138527 | 400 VDC | 0 VDC | 0 | 0 | 0 |
| 1780138290 | 399 VDC | 0 VDC | 0 | 0 | 0 |
| 1780137868 | 401 VDC | 0 VDC | 0 | 0 | 0 |
| 1780136968 | 402 VDC | 0 VDC | 0 | 0 | 0 |
| 1780136847 | 402 VDC | 0 VDC | 0 | 0 | 0 |
| 1780136791 | 402 VDC | 0 VDC | 0 | 0 | 0 |
| 1780136642 | 402 VDC | 0 VDC | 0 | 0 | 0 |
| 1780136568 | 402 VDC | 0 VDC | 0 | 0 | 0 |
| 1780136451 | 401 VDC | 0 VDC | 0 | 0 | 0 |
| 1780135985 | 403 VDC | 0 VDC | 0 | 0 | 0 |
| 1780135084 | 404 VDC | 0 VDC | 0 | 0 | 0 |
| 1780134293 | 405 VDC | 0 VDC | 0 | 0 | 0 |
| 1780134122 | 405 VDC | 0 VDC | 0 | 0 | 0 |
| 1780133222 | 406 VDC | 0 VDC | 0 | 0 | 0 |
| 1780132321 | 406 VDC | 0 VDC | 0 | 0 | 0 |
| 1780132146 | 406 VDC | 0 VDC | 0 | 0 | 0 |
| 1780131992 | 406 VDC | 0 VDC | 0 | 0 | 0 |
| 1780131422 | 407 VDC | 0 VDC | 0 | 0 | 0 |
| 1780130911 | 407 VDC | 0 VDC | 0 | 0 | 0 |
| 1780130773 | 407 VDC | 0 VDC | 0 | 0 | 0 |
| 1780130696 | 407 VDC | 0 VDC | 0 | 0 | 0 |
| 1780130653 | 407 VDC | 0 VDC | 0 | 0 | 0 |
| 1780130381 | 407 VDC | 0 VDC | 0 | 0 | 0 |
| 1780130214 | 407 VDC | 0 VDC | 0 | 0 | 0 |
*Used Equation Coefficients:
V_Bat: 0, 1, 0
V_Ext: 0, 1, 0
Value3: 0, 1, 0
Value4: 0, 1, 0
Value5: 0, 1, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)