APRS Track Direct

My position About ☰

reset

HS6GVH-1 Telemetry

This is the latest recevied telemetry packets stored in our database for station/object HS6GVH-1. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

<< 1 2 3 4 >>

Time	RxTraffic*	TxTraffic*	RSSI*	Voltage*
1790644520	18 Pkt	2 Pkt	-72 dBm	14.81 V
1790643895	22 Pkt	0 Pkt	-72 dBm	14.81 V
1790643271	37 Pkt	4 Pkt	-72 dBm	14.79 V
1790642646	21 Pkt	1 Pkt	-72 dBm	14.72 V
1790642020	12 Pkt	2 Pkt	-73 dBm	14.7 V
1790641395	28 Pkt	3 Pkt	-73 dBm	14.77 V
1790640769	50 Pkt	5 Pkt	-74 dBm	14.81 V
1790640142	33 Pkt	1 Pkt	-73 dBm	14.87 V
1790639516	25 Pkt	3 Pkt	-73 dBm	14.85 V
1790638891	17 Pkt	0 Pkt	-72 dBm	14.87 V
1790638266	12 Pkt	4 Pkt	-73 dBm	14.93 V
1790637641	12 Pkt	4 Pkt	-73 dBm	14.89 V
1790637016	5 Pkt	0 Pkt	-73 dBm	14.89 V
1790636392	16 Pkt	1 Pkt	-74 dBm	14.81 V
1790635767	12 Pkt	0 Pkt	-73 dBm	14.87 V
1790635142	19 Pkt	0 Pkt	-73 dBm	14.85 V
1790634517	15 Pkt	2 Pkt	-72 dBm	14.79 V
1790633893	9 Pkt	0 Pkt	-75 dBm	14.79 V
1790633268	0 Pkt	0 Pkt	-74 dBm	14.77 V
1790613193	17 Pkt	1 Pkt	-73 dBm	14.64 V
1790612568	14 Pkt	2 Pkt	-73 dBm	14.64 V
1790611944	13 Pkt	1 Pkt	-73 dBm	14.6 V
1790611319	14 Pkt	1 Pkt	-73 dBm	14.64 V
1790610694	13 Pkt	1 Pkt	-74 dBm	14.68 V
1790610069	5 Pkt	1 Pkt	-73 dBm	14.66 V

*Used Equation Coefficients:

RxTraffic: 0, 1, 0

TxTraffic: 0, 1, 0

RxDrop: 0, 1, 0

RSSI: 0, -1, 0

Voltage: 0, 1, 0

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)