This is the latest recevied telemetry packets stored in our database for station/object LU9QSA-10. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | RxTraffic* | TxTraffic* | RxDrop* | RSSI* | Voltage* |
|---|---|---|---|---|---|
| 1780106491 | 0 Pkt | 0 Pkt | 0 Pkt | -51 dBm | 5.13 V |
| 1780105562 | 0 Pkt | 0 Pkt | 0 Pkt | -51 dBm | 5.13 V |
| 1780104638 | 0 Pkt | 0 Pkt | 0 Pkt | -53 dBm | 5.11 V |
| 1780103712 | 0 Pkt | 0 Pkt | 0 Pkt | -55 dBm | 5.11 V |
| 1780102790 | 0 Pkt | 0 Pkt | 0 Pkt | -52 dBm | 5.11 V |
| 1780101868 | 0 Pkt | 0 Pkt | 0 Pkt | -53 dBm | 5.11 V |
| 1780100946 | 0 Pkt | 1 Pkt | 0 Pkt | -55 dBm | 5.11 V |
| 1780100024 | 0 Pkt | 0 Pkt | 0 Pkt | -52 dBm | 5.11 V |
| 1780099102 | 0 Pkt | 0 Pkt | 0 Pkt | -53 dBm | 5.11 V |
| 1780098180 | 0 Pkt | 0 Pkt | 0 Pkt | -55 dBm | 5.11 V |
| 1780097258 | 0 Pkt | 32 Pkt | 0 Pkt | -52 dBm | 5.13 V |
| 1780096335 | 0 Pkt | 44 Pkt | 0 Pkt | -55 dBm | 5.11 V |
| 1780095411 | 0 Pkt | 0 Pkt | 0 Pkt | -58 dBm | 5.09 V |
| 1780094489 | 0 Pkt | 0 Pkt | 0 Pkt | -57 dBm | 5.09 V |
| 1780093567 | 0 Pkt | 0 Pkt | 0 Pkt | -58 dBm | 5.11 V |
| 1780092645 | 0 Pkt | 0 Pkt | 0 Pkt | -58 dBm | 5.07 V |
| 1780091723 | 0 Pkt | 0 Pkt | 0 Pkt | -59 dBm | 5.09 V |
| 1780090801 | 0 Pkt | 0 Pkt | 0 Pkt | -59 dBm | 5.13 V |
| 1780089879 | 0 Pkt | 0 Pkt | 0 Pkt | -58 dBm | 5.11 V |
| 1780088957 | 0 Pkt | 1 Pkt | 0 Pkt | -53 dBm | 5.17 V |
| 1780088035 | 0 Pkt | 0 Pkt | 0 Pkt | -54 dBm | 5.11 V |
*Used Equation Coefficients:
RxTraffic: 0, 1, 0
TxTraffic: 0, 1, 0
RxDrop: 0, 1, 0
RSSI: 0, -1, 0
Voltage: 0, 1, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)