APRS Track Direct

My position About ☰

reset

TA3D Telemetry

This is the latest recevied telemetry packets stored in our database for station/object TA3D. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

<< 1 2 3 4 >>

Time	RxTraffic*	TxTraffic*	RxDrop*	RSSI*	Voltage*
1786732304	53 Pkt	12 Pkt	0 Pkt	-71 dBm	13.04 V
1786731367	54 Pkt	16 Pkt	0 Pkt	-72 dBm	13.04 V
1786730427	38 Pkt	17 Pkt	3 Pkt	-79 dBm	13.04 V
1786729486	37 Pkt	12 Pkt	0 Pkt	-74 dBm	13.04 V
1786728550	48 Pkt	16 Pkt	1 Pkt	-75 dBm	13.04 V
1786727609	43 Pkt	15 Pkt	0 Pkt	-75 dBm	13.04 V
1786726671	48 Pkt	14 Pkt	0 Pkt	-71 dBm	13.04 V
1786725732	31 Pkt	13 Pkt	1 Pkt	-77 dBm	13.04 V
1786724794	44 Pkt	16 Pkt	0 Pkt	-72 dBm	13.04 V
1786723854	48 Pkt	17 Pkt	0 Pkt	-73 dBm	13.04 V
1786722911	42 Pkt	16 Pkt	0 Pkt	-75 dBm	13 V
1786721969	57 Pkt	12 Pkt	1 Pkt	-73 dBm	13 V
1786721032	34 Pkt	14 Pkt	0 Pkt	-71 dBm	13.04 V
1786720092	41 Pkt	17 Pkt	0 Pkt	-71 dBm	13 V
1786719148	35 Pkt	14 Pkt	0 Pkt	-76 dBm	13.04 V
1786718208	36 Pkt	14 Pkt	0 Pkt	-73 dBm	13.04 V
1786717270	32 Pkt	14 Pkt	0 Pkt	-72 dBm	13.04 V
1786716331	29 Pkt	19 Pkt	0 Pkt	-71 dBm	13.04 V
1786715387	32 Pkt	14 Pkt	1 Pkt	-76 dBm	13 V
1786714449	41 Pkt	18 Pkt	0 Pkt	-77 dBm	13 V
1786713506	43 Pkt	16 Pkt	0 Pkt	-75 dBm	13 V
1786712568	48 Pkt	23 Pkt	0 Pkt	-74 dBm	13 V
1786711618	36 Pkt	20 Pkt	0 Pkt	-74 dBm	13 V
1786710672	34 Pkt	22 Pkt	0 Pkt	-74 dBm	13 V
1786709725	38 Pkt	19 Pkt	0 Pkt	-73 dBm	13.04 V

*Used Equation Coefficients:

RxTraffic: 0, 1, 0

TxTraffic: 0, 1, 0

RxDrop: 0, 1, 0

RSSI: 0, -1, 0

Voltage: 0, 1, 0

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)