APRS Track Direct

My position About ☰

reset

HS6UUC Telemetry

This is the latest recevied telemetry packets stored in our database for station/object HS6UUC. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

<< 1 2 3 4 >>

Time	RxTraffic*	TxTraffic*	RxDrop*	RSSI*	Voltage*
1754279402	0 Pkt	0 Pkt	0 Pkt	-31 dBm	0 V
1754279080	0 Pkt	0 Pkt	0 Pkt	-31 dBm	0 V
1754278758	0 Pkt	0 Pkt	0 Pkt	-28 dBm	0 V
1754278436	0 Pkt	0 Pkt	0 Pkt	-29 dBm	0 V
1754278114	0 Pkt	0 Pkt	0 Pkt	-30 dBm	0 V
1754277792	0 Pkt	0 Pkt	0 Pkt	-30 dBm	0 V
1754277470	0 Pkt	0 Pkt	0 Pkt	-31 dBm	0 V
1754277148	0 Pkt	0 Pkt	0 Pkt	-31 dBm	0 V
1754276826	0 Pkt	0 Pkt	0 Pkt	-29 dBm	0 V
1754276504	0 Pkt	0 Pkt	0 Pkt	-29 dBm	0 V
1754276182	0 Pkt	0 Pkt	0 Pkt	-30 dBm	0 V
1754275860	0 Pkt	0 Pkt	0 Pkt	-29 dBm	0 V
1754275538	0 Pkt	0 Pkt	0 Pkt	-29 dBm	0 V
1754275216	0 Pkt	0 Pkt	0 Pkt	-36 dBm	0 V
1754274894	0 Pkt	0 Pkt	0 Pkt	-30 dBm	0 V
1754274572	0 Pkt	0 Pkt	0 Pkt	-33 dBm	0 V
1754274250	0 Pkt	0 Pkt	0 Pkt	-28 dBm	0 V
1754273928	0 Pkt	0 Pkt	0 Pkt	-39 dBm	0 V
1754273606	0 Pkt	0 Pkt	0 Pkt	-30 dBm	0 V
1754273284	0 Pkt	0 Pkt	0 Pkt	-32 dBm	0 V
1754272962	0 Pkt	0 Pkt	0 Pkt	-32 dBm	0 V
1754272651	0 Pkt	0 Pkt	0 Pkt	-32 dBm	0 V
1754272318	0 Pkt	0 Pkt	0 Pkt	-31 dBm	0 V
1754271996	0 Pkt	0 Pkt	0 Pkt	-30 dBm	0 V
1754271674	0 Pkt	0 Pkt	0 Pkt	-28 dBm	0 V

*Used Equation Coefficients:

RxTraffic: 0, 1, 0

TxTraffic: 0, 1, 0

RxDrop: 0, 1, 0

RSSI: 0, -1, 0

Voltage: 0, 1, 0

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)