This is the latest recevied telemetry packets stored in our database for station/object IW3BRC-7. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | Temp* | Druck* | Wind* | Regen* | Wasser* |
|---|---|---|---|---|---|
| 1786738626 | 26.2 degC | 1014 hPa | 1.9 m/s | 0 mm | 0 cm |
| 1786734892 | 28.9 degC | 1013 hPa | 1.1 m/s | 0 mm | 0 cm |
| 1786731155 | 31.9 degC | 1011 hPa | 0.7 m/s | 0 mm | 0 cm |
| 1786727418 | 33.6 degC | 1010 hPa | 0.2 m/s | 0 mm | 0 cm |
| 1786723683 | 35.4 degC | 1010 hPa | 1.2 m/s | 0 mm | 0 cm |
| 1786719947 | 35.7 degC | 1010 hPa | 1.8 m/s | 0 mm | 0 cm |
| 1786716212 | 34.9 degC | 1011 hPa | 1.1 m/s | 0 mm | 0 cm |
| 1786712477 | 34 degC | 1012 hPa | 1.1 m/s | 0 mm | 0 cm |
| 1786708742 | 32.4 degC | 1014 hPa | 1 m/s | 0 mm | 0 cm |
| 1786705005 | 31.2 degC | 1016 hPa | 1.2 m/s | 0 mm | 0 cm |
| 1786701274 | 29.1 degC | 1017 hPa | 0.5 m/s | 0 mm | 0 cm |
| 1786697532 | 27.5 degC | 1018 hPa | 0.3 m/s | 0 mm | 0 cm |
| 1786693797 | 25.5 degC | 1019 hPa | 0.5 m/s | 0 mm | 0 cm |
| 1786690061 | 23.5 degC | 1020 hPa | 0.3 m/s | 0 mm | 0 cm |
| 1786686324 | 20.2 degC | 1020 hPa | 1.4 m/s | 0 mm | 0 cm |
| 1786678853 | 20 degC | 1020 hPa | 1.2 m/s | 0 mm | 0 cm |
| 1786675118 | 20.7 degC | 1020 hPa | 0.6 m/s | 0 mm | 0 cm |
| 1786671381 | 20.9 degC | 1020 hPa | 1.7 m/s | 0 mm | 0 cm |
| 1786667648 | 21.3 degC | 1020 hPa | 1.2 m/s | 0 mm | 0 cm |
| 1786663914 | 21.7 degC | 1020 hPa | 0.9 m/s | 0 mm | 0 cm |
| 1786660183 | 22.5 degC | 1020 hPa | 0.8 m/s | 0 mm | 0 cm |
| 1786656450 | 24 degC | 1019 hPa | 0.6 m/s | 0 mm | 0 cm |
*Used Equation Coefficients:
Temp: 0, 0.1, -50
Druck: 0, 1, 800
Wind: 0, 0.1, 0
Regen: 0, 1, 0
Wasser: 0, 1, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)