This is the latest recevied telemetry packets stored in our database for station/object DO1SFT-6. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | VBatt* | Temp* | Value3* | Value4* | Value5* |
|---|---|---|---|---|---|
| 1750177839 | 13.65 Volt | 40.5 C | 0 | 0 | 0 |
| 1750176939 | 13.65 Volt | 40 C | 0 | 0 | 0 |
| 1750176039 | 13.65 Volt | 40 C | 0 | 0 | 0 |
| 1750175139 | 13.65 Volt | 39.5 C | 0 | 0 | 0 |
| 1750174239 | 13.65 Volt | 39 C | 0 | 0 | 0 |
| 1750173339 | 13.65 Volt | 38.5 C | 0 | 0 | 0 |
| 1750172439 | 13.65 Volt | 38 C | 0 | 0 | 0 |
| 1750171539 | 13.65 Volt | 37 C | 0 | 0 | 0 |
| 1750170639 | 13.65 Volt | 36.5 C | 0 | 0 | 0 |
| 1750169739 | 13.65 Volt | 35.5 C | 0 | 0 | 0 |
| 1750168839 | 13.65 Volt | 34.5 C | 0 | 0 | 0 |
| 1750167939 | 13.65 Volt | 34 C | 0 | 0 | 0 |
| 1750167039 | 13.65 Volt | 33 C | 0 | 0 | 0 |
| 1750166139 | 13.65 Volt | 32.5 C | 0 | 0 | 0 |
| 1750165239 | 13.65 Volt | 32 C | 0 | 0 | 0 |
| 1750164339 | 13.65 Volt | 31.5 C | 0 | 0 | 0 |
| 1750163439 | 13.73 Volt | 31 C | 0 | 0 | 0 |
| 1750162539 | 13.88 Volt | 30.5 C | 0 | 0 | 0 |
| 1750161639 | 13.95 Volt | 30 C | 0 | 0 | 0 |
| 1750160739 | 14.03 Volt | 29 C | 0 | 0 | 0 |
| 1750159839 | 14.18 Volt | 28.5 C | 0 | 0 | 0 |
| 1750158940 | 14.33 Volt | 28 C | 0 | 0 | 0 |
| 1750158039 | 14.48 Volt | 27.5 C | 0 | 0 | 0 |
| 1750157140 | 14.7 Volt | 27 C | 0 | 0 | 0 |
| 1750156240 | 14.7 Volt | 26.5 C | 0 | 0 | 0 |
*Used Equation Coefficients:
VBatt: 0, 0.075, 0
Temp: 0, 0.5, -64
Value3: 0, 0, 0
Value4: 0, 0, 0
Value5: 0, 0, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)