APRS Track Direct

My position About ☰

reset

HS5XCL-1 Telemetry

This is the latest recevied telemetry packets stored in our database for station/object HS5XCL-1. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

<< 1 2 3 4 >>

Time	RxTraffic*	TxTraffic*	RSSI*	Voltage*
1770115054	0 Pkt	0 Pkt	-77 dBm	7.81 V
1770114444	1 Pkt	0 Pkt	-74 dBm	7.83 V
1770113834	1 Pkt	0 Pkt	-72 dBm	7.81 V
1770113224	0 Pkt	0 Pkt	-74 dBm	7.81 V
1770112614	1 Pkt	1 Pkt	-71 dBm	7.81 V
1770112004	1 Pkt	0 Pkt	-73 dBm	7.81 V
1770111394	1 Pkt	0 Pkt	-71 dBm	7.81 V
1770110784	0 Pkt	0 Pkt	-70 dBm	7.83 V
1770110174	0 Pkt	1 Pkt	-70 dBm	7.81 V
1770109564	0 Pkt	0 Pkt	-72 dBm	7.83 V
1770108954	0 Pkt	0 Pkt	-74 dBm	7.83 V
1770108344	0 Pkt	0 Pkt	-72 dBm	7.81 V
1770107734	0 Pkt	0 Pkt	-71 dBm	7.83 V
1770107124	1 Pkt	0 Pkt	-70 dBm	7.81 V
1770106514	1 Pkt	0 Pkt	-70 dBm	7.81 V
1770105904	1 Pkt	0 Pkt	-71 dBm	7.81 V
1770105294	0 Pkt	0 Pkt	-73 dBm	7.83 V
1770104683	1 Pkt	0 Pkt	-73 dBm	7.81 V
1770104074	1 Pkt	0 Pkt	-73 dBm	7.81 V
1770103463	0 Pkt	0 Pkt	-72 dBm	7.83 V
1770102853	1 Pkt	1 Pkt	-70 dBm	7.81 V
1770102244	0 Pkt	0 Pkt	-71 dBm	7.81 V
1770101633	0 Pkt	0 Pkt	-77 dBm	7.83 V
1770101023	0 Pkt	0 Pkt	-80 dBm	7.81 V
1770100413	1 Pkt	0 Pkt	-78 dBm	7.81 V

*Used Equation Coefficients:

RxTraffic: 0, 1, 0

TxTraffic: 0, 1, 0

RxDrop: 0, 1, 0

RSSI: 0, -1, 0

Voltage: 0, 1, 0

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)