APRS Track Direct

My position About ☰

reset

HS5AC-10 Telemetry

This is the latest recevied telemetry packets stored in our database for station/object HS5AC-10. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

Time	PM1.0*	PM2.5*	PM10*	RSSI*	Voltage*
1779892933	14 ug/m3	19 ug/m3	20 ug/m3	-18 dBm	13.08 V
1779892308	11 ug/m3	16 ug/m3	17 ug/m3	-18 dBm	13.06 V
1779891683	13 ug/m3	19 ug/m3	22 ug/m3	-19 dBm	13.04 V
1779891059	15 ug/m3	19 ug/m3	20 ug/m3	-18 dBm	13.08 V
1779890434	13 ug/m3	18 ug/m3	20 ug/m3	-18 dBm	13.04 V
1779889809	15 ug/m3	21 ug/m3	21 ug/m3	-18 dBm	13.08 V
1779889184	15 ug/m3	19 ug/m3	19 ug/m3	-19 dBm	13.04 V
1779888560	17 ug/m3	23 ug/m3	29 ug/m3	-19 dBm	13.04 V
1779887936	13 ug/m3	18 ug/m3	20 ug/m3	-20 dBm	13.04 V
1779887311	16 ug/m3	21 ug/m3	23 ug/m3	-18 dBm	13.04 V
1779886687	15 ug/m3	19 ug/m3	19 ug/m3	-19 dBm	13.08 V
1779886062	12 ug/m3	16 ug/m3	17 ug/m3	-20 dBm	13.04 V
1779885438	12 ug/m3	16 ug/m3	16 ug/m3	-19 dBm	13.04 V
1779884813	10 ug/m3	13 ug/m3	13 ug/m3	-19 dBm	13.04 V
1779884188	8 ug/m3	10 ug/m3	10 ug/m3	-19 dBm	13.04 V
1779883563	8 ug/m3	12 ug/m3	14 ug/m3	-20 dBm	13.04 V
1779882937	8 ug/m3	10 ug/m3	11 ug/m3	-19 dBm	13.04 V
1779882311	8 ug/m3	10 ug/m3	14 ug/m3	-19 dBm	13.04 V
1779881683	9 ug/m3	11 ug/m3	11 ug/m3	-20 dBm	13.08 V
1779881053	7 ug/m3	13 ug/m3	19 ug/m3	-19 dBm	13.04 V
1779879974	8 ug/m3	10 ug/m3	11 ug/m3	-8 dBm	13.08 V

*Used Equation Coefficients:

PM1.0: 0, 1, 0

PM2.5: 0, 1, 0

PM10: 0, 1, 0

RSSI: 0, -1, 0

Voltage: 0, 1, 0

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)