APRS Track Direct

My position About ☰

reset

9A4QV-4 Telemetry

This is the latest recevied telemetry packets stored in our database for station/object 9A4QV-4. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

Time	Vin*	Rx1h*	Eff1h*	Temp*
1758208353	13.65 Volt	1260 Pkt	60 Pcnt	24.26 C°
1758207177	13.58 Volt	1270 Pkt	60 Pcnt	24.4 C°
1758206553	13.5 Volt	1260 Pkt	60 Pcnt	24.26 C°
1758204753	13.88 Volt	1210 Pkt	62 Pcnt	24.4 C°
1758203256	13.73 Volt	1120 Pkt	65 Pcnt	24.4 C°
1758202953	13.58 Volt	1120 Pkt	65 Pcnt	24.4 C°
1758201153	13.43 Volt	1050 Pkt	62 Pcnt	24.55 C°
1758199361	13.8 Volt	960 Pkt	59 Pcnt	24.55 C°
1758199353	13.8 Volt	960 Pkt	59 Pcnt	24.55 C°
1758197553	13.58 Volt	930 Pkt	57 Pcnt	24.26 C°
1758195753	13.8 Volt	920 Pkt	56 Pcnt	24.26 C°
1758195469	13.88 Volt	940 Pkt	57 Pcnt	24.11 C°
1758193953	13.8 Volt	980 Pkt	58 Pcnt	24.11 C°
1758192153	13.88 Volt	1000 Pkt	57 Pcnt	23.97 C°
1758191554	13.88 Volt	1000 Pkt	57 Pcnt	23.83 C°
1758190353	13.88 Volt	1010 Pkt	57 Pcnt	23.97 C°
1758188553	13.88 Volt	1160 Pkt	60 Pcnt	23.97 C°
1758187682	13.88 Volt	1190 Pkt	62 Pcnt	23.83 C°
1758186753	13.58 Volt	1210 Pkt	61 Pcnt	23.68 C°
1758184953	13.5 Volt	1370 Pkt	63 Pcnt	23.97 C°
1758183756	13.2 Volt	1470 Pkt	62 Pcnt	23.83 C°
1758183153	12.83 Volt	1520 Pkt	62 Pcnt	23.83 C°
1758181353	12.83 Volt	1540 Pkt	60 Pcnt	23.83 C°

*Used Equation Coefficients:

Vin: 0, 0.075, 0

Rx1h: 0, 10, 0

Dg1h: 0, 10, 0

Eff1h: 0, 1, 0

Temp: 0, 0.1444, 0

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)