APRS Track Direct

My position About ☰

reset

PP1RK-15 Telemetry

This is the latest recevied telemetry packets stored in our database for station/object PP1RK-15. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

Time	Vin*	Rx1h*	Dg1h*	Eff1h*
1790646021	13.28 Volt	70 Pkt	20 Pkt	44 Pcnt
1790642418	13.28 Volt	70 Pkt	10 Pkt	46 Pcnt
1790638814	13.28 Volt	160 Pkt	50 Pkt	73 Pcnt
1790635211	13.28 Volt	130 Pkt	50 Pkt	70 Pcnt
1790631607	13.28 Volt	110 Pkt	40 Pkt	66 Pcnt
1790628004	13.28 Volt	140 Pkt	50 Pkt	85 Pcnt
1790624400	13.28 Volt	160 Pkt	60 Pkt	92 Pcnt
1790620797	13.28 Volt	120 Pkt	40 Pkt	72 Pcnt
1790617193	13.28 Volt	100 Pkt	30 Pkt	62 Pcnt
1790613590	13.28 Volt	130 Pkt	50 Pkt	79 Pcnt
1790609986	13.28 Volt	170 Pkt	70 Pkt	96 Pcnt
1790606383	13.28 Volt	170 Pkt	70 Pkt	97 Pcnt
1790602779	13.28 Volt	230 Pkt	80 Pkt	95 Pcnt
1790599176	13.28 Volt	260 Pkt	100 Pkt	86 Pcnt
1790595573	13.28 Volt	280 Pkt	90 Pkt	97 Pcnt
1790591969	13.28 Volt	210 Pkt	70 Pkt	91 Pcnt
1790588366	13.28 Volt	130 Pkt	40 Pkt	76 Pcnt
1790584762	13.28 Volt	180 Pkt	70 Pkt	92 Pcnt
1790581159	13.28 Volt	170 Pkt	70 Pkt	97 Pcnt
1790577555	13.28 Volt	160 Pkt	70 Pkt	97 Pcnt
1790573952	13.28 Volt	130 Pkt	50 Pkt	75 Pcnt
1790570348	13.28 Volt	160 Pkt	60 Pkt	87 Pcnt
1790566745	13.28 Volt	160 Pkt	60 Pkt	94 Pcnt
1790563141	13.28 Volt	190 Pkt	70 Pkt	89 Pcnt

*Used Equation Coefficients:

Vin: 0, 0.075, 0

Rx1h: 0, 10, 0

Dg1h: 0, 10, 0

Eff1h: 0, 1, 0

A5: 0, 0, 0

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)