This is the latest recevied telemetry packets stored in our database for station/object IZ1DNG. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | Value1* | Value2* | Value3* | Value4* | Value5* |
|---|---|---|---|---|---|
| 1779820956 | 151 | 173 | 154 | 122 | 159 |
| 1779820608 | 152 | 209 | 214 | 209 | 189 |
| 1779820567 | 152 | 207 | 232 | 235 | 203 |
| 1779820525 | 152 | 208 | 234 | 224 | 192 |
| 1779820514 | 152 | 208 | 235 | 239 | 207 |
| 1779820504 | 152 | 207 | 227 | 235 | 203 |
| 1779820493 | 152 | 207 | 225 | 233 | 202 |
| 1779820455 | 152 | 208 | 234 | 237 | 200 |
| 1779820438 | 152 | 208 | 234 | 224 | 205 |
| 1779820390 | 151 | 208 | 234 | 238 | 206 |
| 1779820382 | 151 | 208 | 214 | 216 | 198 |
| 1779820372 | 152 | 208 | 234 | 238 | 206 |
| 1779820361 | 151 | 207 | 227 | 224 | 192 |
| 1779820345 | 151 | 208 | 234 | 225 | 197 |
| 1779820321 | 151 | 207 | 226 | 232 | 201 |
| 1779820312 | 151 | 208 | 214 | 216 | 198 |
| 1779820302 | 151 | 208 | 234 | 238 | 207 |
| 1779820293 | 151 | 207 | 233 | 237 | 206 |
| 1779820281 | 151 | 208 | 215 | 230 | 200 |
| 1779820170 | 151 | 125 | 134 | 115 | 146 |
| 1779810387 | 151 | 208 | 236 | 225 | 190 |
| 1779810380 | 151 | 210 | 224 | 244 | 195 |
| 1779810372 | 151 | 209 | 225 | 233 | 196 |
| 1779810365 | 151 | 209 | 224 | 244 | 195 |
| 1779810353 | 151 | 209 | 225 | 219 | 194 |
*Used Equation Coefficients:
Value1: 0, 1, 0
Value2: 0, 1, 0
Value3: 0, 1, 0
Value4: 0, 1, 0
Value5: 0, 1, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)