This is the latest recevied telemetry packets stored in our database for station/object SV9TNF-3. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | Wifi* | RSSI* | Value3* | Value4* | Value5* |
|---|---|---|---|---|---|
| 1790657706 | 100 % | -51 dBm | 0 | 0 | 0 |
| 1790657406 | 98 % | -50 dBm | 0 | 0 | 0 |
| 1790657106 | 96 % | -51 dBm | 0 | 0 | 0 |
| 1790656806 | 98 % | -52 dBm | 0 | 0 | 0 |
| 1790656506 | 98 % | -51 dBm | 0 | 0 | 0 |
| 1790656206 | 96 % | -51 dBm | 0 | 0 | 0 |
| 1790655906 | 96 % | -54 dBm | 0 | 0 | 0 |
| 1790655606 | 96 % | -51 dBm | 0 | 0 | 0 |
| 1790655306 | 94 % | -51 dBm | 0 | 0 | 0 |
| 1790655006 | 98 % | -51 dBm | 0 | 0 | 0 |
| 1790654706 | 96 % | -51 dBm | 0 | 0 | 0 |
| 1790654406 | 98 % | -52 dBm | 0 | 0 | 0 |
| 1790654106 | 96 % | -51 dBm | 0 | 0 | 0 |
| 1790653806 | 98 % | -51 dBm | 0 | 0 | 0 |
| 1790653506 | 96 % | -51 dBm | 0 | 0 | 0 |
| 1790653206 | 98 % | -51 dBm | 0 | 0 | 0 |
| 1790652906 | 96 % | -50 dBm | 0 | 0 | 0 |
| 1790652606 | 98 % | -52 dBm | 0 | 0 | 0 |
| 1790652306 | 98 % | -52 dBm | 0 | 0 | 0 |
| 1790652006 | 92 % | -52 dBm | 0 | 0 | 0 |
| 1790651706 | 96 % | -52 dBm | 0 | 0 | 0 |
| 1790651406 | 100 % | -51 dBm | 0 | 0 | 0 |
| 1790651106 | 96 % | -51 dBm | 0 | 0 | 0 |
| 1790650806 | 98 % | -51 dBm | 0 | 0 | 0 |
| 1790650506 | 100 % | -51 dBm | 0 | 0 | 0 |
*Used Equation Coefficients:
Wifi: 0, 1, 0
RSSI: 0, 1, 0
Value3: 0, 1, 0
Value4: 0, 1, 0
Value5: 0, 1, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)