This is the latest recevied telemetry packets stored in our database for station/object DL0PBS-5. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
Time | Vin* | U1* | U2* | I1* | Temp* |
---|---|---|---|---|---|
1718716408 | 12.38 Volt | 13.9 Volt | 0 Volt | 0 mA | 18 C |
1718716110 | 12.38 Volt | 13.9 Volt | 0 Volt | 0 mA | 18 C |
1718715808 | 12.38 Volt | 13.9 Volt | 0 Volt | 0 mA | 18 C |
1718715507 | 12.38 Volt | 13.9 Volt | 0 Volt | 0 mA | 18 C |
1718715208 | 12.38 Volt | 13.9 Volt | 0 Volt | 0 mA | 18 C |
1718714908 | 12.38 Volt | 13.9 Volt | 0 Volt | 0 mA | 18 C |
1718714607 | 12.38 Volt | 13.9 Volt | 0 Volt | 0 mA | 18 C |
1718714306 | 12.38 Volt | 13.9 Volt | 0 Volt | 0 mA | 18 C |
1718714007 | 12.38 Volt | 13.9 Volt | 0 Volt | 0 mA | 18 C |
1718713707 | 12.38 Volt | 13.9 Volt | 0 Volt | 0 mA | 18 C |
1718713408 | 12.38 Volt | 13.9 Volt | 0 Volt | 0 mA | 18 C |
1718713106 | 12.38 Volt | 13.9 Volt | 0 Volt | 0 mA | 18 C |
1718712806 | 12.38 Volt | 13.9 Volt | 0 Volt | 0 mA | 18 C |
1718712504 | 12.38 Volt | 13.9 Volt | 0 Volt | 0 mA | 18 C |
1718712205 | 12.38 Volt | 13.9 Volt | 0 Volt | 0 mA | 18 C |
1718711904 | 12.38 Volt | 13.9 Volt | 0 Volt | 0 mA | 18 C |
1718711605 | 12.38 Volt | 13.9 Volt | 0 Volt | 0 mA | 18 C |
1718711304 | 12.38 Volt | 13.9 Volt | 0 Volt | 0 mA | 18 C |
1718711003 | 12.38 Volt | 13.9 Volt | 0 Volt | 0 mA | 18 C |
1718710704 | 12.38 Volt | 13.9 Volt | 0 Volt | 0 mA | 18 C |
1718710404 | 12.38 Volt | 13.9 Volt | 0 Volt | 0 mA | 18 C |
1718710102 | 12.38 Volt | 13.9 Volt | 0 Volt | 0 mA | 17.5 C |
1718709803 | 12.38 Volt | 13.9 Volt | 0 Volt | 0 mA | 17.5 C |
1718709502 | 12.38 Volt | 13.9 Volt | 0 Volt | 0 mA | 17.5 C |
1718709202 | 12.38 Volt | 13.9 Volt | 0 Volt | 0 mA | 17.5 C |
*Used Equation Coefficients:
Vin: 0, 0.075, 0
U1: 0, 0.1, 0
U2: 0, 0.1, 0
I1: 0, 19.5, 0
Temp: 0, 0.5, -64
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)