This is the latest recevied telemetry packets stored in our database for station/object EA5SW-11. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | TX* | RX* | Digi* | V_Bat* | V_Ext* |
|---|---|---|---|---|---|
| 1779784216 | 56 Count | 108 Count | 0 Count | 0 VDC | 0 VDC |
| 1779782416 | 56 Count | 58 Count | 0 Count | 0 VDC | 0 VDC |
| 1779780616 | 56 Count | 48 Count | 0 Count | 0 VDC | 0 VDC |
| 1779778816 | 56 Count | 47 Count | 0 Count | 0 VDC | 0 VDC |
| 1779777016 | 56 Count | 47 Count | 0 Count | 0 VDC | 0 VDC |
| 1779775216 | 56 Count | 47 Count | 0 Count | 0 VDC | 0 VDC |
| 1779773416 | 56 Count | 47 Count | 0 Count | 0 VDC | 0 VDC |
| 1779771616 | 56 Count | 47 Count | 0 Count | 0 VDC | 0 VDC |
| 1779769816 | 56 Count | 47 Count | 0 Count | 0 VDC | 0 VDC |
| 1779768016 | 56 Count | 47 Count | 0 Count | 0 VDC | 0 VDC |
| 1779741156 | 56 Count | 47 Count | 0 Count | 0 VDC | 0 VDC |
| 1779739356 | 56 Count | 47 Count | 0 Count | 0 VDC | 0 VDC |
| 1779737556 | 56 Count | 47 Count | 0 Count | 0 VDC | 0 VDC |
| 1779735756 | 56 Count | 47 Count | 0 Count | 0 VDC | 0 VDC |
| 1779733956 | 56 Count | 47 Count | 0 Count | 0 VDC | 0 VDC |
| 1779733820 | 56 Count | 47 Count | 0 Count | 0 VDC | 0 VDC |
| 1779732020 | 56 Count | 47 Count | 0 Count | 0 VDC | 0 VDC |
| 1779730220 | 56 Count | 47 Count | 0 Count | 0 VDC | 0 VDC |
| 1779728420 | 56 Count | 47 Count | 0 Count | 0 VDC | 0 VDC |
| 1779726620 | 56 Count | 46 Count | 0 Count | 0 VDC | 0 VDC |
| 1779724820 | 56 Count | 46 Count | 0 Count | 0 VDC | 0 VDC |
| 1779723018 | 56 Count | 46 Count | 0 Count | 0 VDC | 0 VDC |
| 1779721218 | 56 Count | 46 Count | 0 Count | 0 VDC | 0 VDC |
| 1779719418 | 56 Count | 46 Count | 0 Count | 0 VDC | 0 VDC |
| 1779717618 | 56 Count | 46 Count | 0 Count | 0 VDC | 0 VDC |
*Used Equation Coefficients:
TX: 0, 1, 0
RX: 0, 1, 0
Digi: 0, 1, 0
V_Bat: 0, 0.01, 0
V_Ext: 0, 0.02, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)