This is the latest recevied telemetry packets stored in our database for station/object HB9RL-10. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | Value1* | Value2* | Value3* | Value4* | Value5* |
|---|---|---|---|---|---|
| 1794907018 | 432 | 0 | 0 | 0 | 0 |
| 1794906118 | 424 | 0 | 0 | 0 | 0 |
| 1794905218 | 433 | 0 | 0 | 0 | 0 |
| 1794904318 | 431 | 0 | 0 | 0 | 0 |
| 1794903418 | 431 | 0 | 0 | 0 | 0 |
| 1794902517 | 433 | 0 | 0 | 0 | 0 |
| 1794901617 | 431 | 0 | 0 | 0 | 0 |
| 1794900717 | 434 | 0 | 0 | 0 | 0 |
| 1794899817 | 429 | 0 | 0 | 0 | 0 |
| 1794898917 | 430 | 0 | 0 | 0 | 0 |
| 1794898017 | 430 | 0 | 0 | 0 | 0 |
| 1794897117 | 425 | 0 | 0 | 0 | 0 |
| 1794896217 | 425 | 0 | 0 | 0 | 0 |
| 1794895317 | 433 | 0 | 0 | 0 | 0 |
| 1794894417 | 431 | 0 | 0 | 0 | 0 |
| 1794893517 | 430 | 0 | 0 | 0 | 0 |
| 1794892616 | 430 | 0 | 0 | 0 | 0 |
| 1794891716 | 431 | 0 | 0 | 0 | 0 |
| 1794890816 | 429 | 0 | 0 | 0 | 0 |
| 1794889916 | 433 | 0 | 0 | 0 | 0 |
| 1794889016 | 433 | 0 | 0 | 0 | 0 |
| 1794888116 | 425 | 0 | 0 | 0 | 0 |
| 1794887216 | 425 | 0 | 0 | 0 | 0 |
| 1794886316 | 429 | 0 | 0 | 0 | 0 |
| 1794885416 | 427 | 0 | 0 | 0 | 0 |
*Used Equation Coefficients:
Value1: 0, 1, 0
Value2: 0, 1, 0
Value3: 0, 1, 0
Value4: 0, 1, 0
Value5: 0, 1, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)