This is the latest recevied telemetry packets stored in our database for station/object YC2YIZ-10. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | TX* | RX* | Digi* | V_Bat* | V_Ext* |
|---|---|---|---|---|---|
| 1779769986 | 0 Count | 582 Count | 0 Count | 0 VDC | 0 VDC |
| 1779768186 | 0 Count | 571 Count | 0 Count | 0 VDC | 0 VDC |
| 1779766386 | 0 Count | 555 Count | 0 Count | 0 VDC | 0 VDC |
| 1779764586 | 0 Count | 543 Count | 0 Count | 0 VDC | 0 VDC |
| 1779762786 | 0 Count | 526 Count | 0 Count | 0 VDC | 0 VDC |
| 1779760986 | 0 Count | 513 Count | 0 Count | 0 VDC | 0 VDC |
| 1779759186 | 0 Count | 500 Count | 0 Count | 0 VDC | 0 VDC |
| 1779757386 | 0 Count | 489 Count | 0 Count | 0 VDC | 0 VDC |
| 1779755586 | 0 Count | 474 Count | 0 Count | 0 VDC | 0 VDC |
| 1779753786 | 0 Count | 462 Count | 0 Count | 0 VDC | 0 VDC |
| 1779751986 | 0 Count | 449 Count | 0 Count | 0 VDC | 0 VDC |
| 1779750185 | 0 Count | 436 Count | 0 Count | 0 VDC | 0 VDC |
| 1779748388 | 0 Count | 427 Count | 0 Count | 0 VDC | 0 VDC |
| 1779746588 | 0 Count | 416 Count | 0 Count | 0 VDC | 0 VDC |
| 1779744788 | 0 Count | 405 Count | 0 Count | 0 VDC | 0 VDC |
| 1779742988 | 0 Count | 388 Count | 0 Count | 0 VDC | 0 VDC |
| 1779741188 | 0 Count | 371 Count | 0 Count | 0 VDC | 0 VDC |
| 1779739388 | 0 Count | 360 Count | 0 Count | 0 VDC | 0 VDC |
| 1779737588 | 0 Count | 347 Count | 0 Count | 0 VDC | 0 VDC |
| 1779735788 | 0 Count | 335 Count | 0 Count | 0 VDC | 0 VDC |
| 1779733987 | 0 Count | 324 Count | 0 Count | 0 VDC | 0 VDC |
| 1779732187 | 0 Count | 308 Count | 0 Count | 0 VDC | 0 VDC |
| 1779730387 | 0 Count | 296 Count | 0 Count | 0 VDC | 0 VDC |
| 1779728592 | 0 Count | 283 Count | 0 Count | 0 VDC | 0 VDC |
| 1779726785 | 0 Count | 271 Count | 0 Count | 0 VDC | 0 VDC |
*Used Equation Coefficients:
TX: 0, 1, 0
RX: 0, 1, 0
Digi: 0, 1, 0
V_Bat: 0, 0.01, 0
V_Ext: 0, 0.02, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)