APRS Track Direct

My position About ☰

reset

SR8NL Telemetry

This is the latest recevied telemetry packets stored in our database for station/object SR8NL. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

<< 1 2 3 4 >>

Time	DgR_1h*	Rx_1h*	Dg_1h*	Eff_1h*	Temp*
1782488284	19.43 Pcnt	280 Pkt	50 Pkt	86 %	33.5 C
1782487684	17.74 Pcnt	260 Pkt	40 Pkt	88 %	34 C
1782487084	16.92 Pcnt	260 Pkt	40 Pkt	87 %	34 C
1782486484	19.4 Pcnt	260 Pkt	50 Pkt	85 %	34 C
1782485884	20.94 Pcnt	270 Pkt	50 Pkt	83 %	33.5 C
1782485284	22.44 Pcnt	300 Pkt	60 Pkt	80 %	33.5 C
1782484684	24.52 Pcnt	310 Pkt	70 Pkt	78 %	33.5 C
1782484084	27.07 Pcnt	310 Pkt	80 Pkt	76 %	33.5 C
1782483484	26.3 Pcnt	340 Pkt	90 Pkt	74 %	33.5 C
1782482884	25.61 Pcnt	360 Pkt	90 Pkt	75 %	34 C
1782482284	26.65 Pcnt	370 Pkt	100 Pkt	76 %	34 C
1782481684	26.26 Pcnt	370 Pkt	90 Pkt	78 %	33.5 C
1782481084	29.21 Pcnt	380 Pkt	110 Pkt	77 %	33.5 C
1782480484	31.55 Pcnt	350 Pkt	110 Pkt	77 %	33 C
1782479884	30.73 Pcnt	370 Pkt	110 Pkt	79 %	33 C
1782479284	30.28 Pcnt	360 Pkt	100 Pkt	78 %	33 C
1782478684	31.86 Pcnt	360 Pkt	110 Pkt	76 %	33 C
1782478084	34.72 Pcnt	330 Pkt	110 Pkt	75 %	33 C
1782477484	30.74 Pcnt	300 Pkt	90 Pkt	74 %	33 C
1782476884	30.85 Pcnt	280 Pkt	80 Pkt	74 %	33 C
1782476284	26.53 Pcnt	290 Pkt	70 Pkt	76 %	33 C
1782475684	25.19 Pcnt	250 Pkt	60 Pkt	76 %	33 C
1782475084	19.05 Pcnt	230 Pkt	40 Pkt	78 %	33 C
1782474484	11.74 Pcnt	210 Pkt	20 Pkt	81 %	33 C
1782473884	11.43 Pcnt	210 Pkt	20 Pkt	84 %	33 C

*Used Equation Coefficients:

DgR_1h: 0, 0.001, 0

Rx_1h: 0, 10, 0

Dg_1h: 0, 10, 0

Eff_1h: 0, 1, 0

Temp: 0, 0.5, -64

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)