This is the latest recevied telemetry packets stored in our database for station/object KC8SWY-15. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | Vin* | Rx1h* | Dg1h* | Eff1h* | BarnT* |
|---|---|---|---|---|---|
| 1786721576 | 12.53 Volt | 0 Pkt | 0 Pkt | 14 Pcnt | 73.4 F |
| 1786721276 | 12.6 Volt | 0 Pkt | 0 Pkt | 12 Pcnt | 73.4 F |
| 1786720976 | 12.6 Volt | 0 Pkt | 0 Pkt | 11 Pcnt | 73.4 F |
| 1786720676 | 12.53 Volt | 0 Pkt | 0 Pkt | 11 Pcnt | 73.4 F |
| 1786720376 | 12.6 Volt | 0 Pkt | 0 Pkt | 11 Pcnt | 73.4 F |
| 1786720076 | 12.6 Volt | 0 Pkt | 0 Pkt | 10 Pcnt | 73.4 F |
| 1786719777 | 12.6 Volt | 0 Pkt | 0 Pkt | 11 Pcnt | 72.5 F |
| 1786719776 | 12.6 Volt | 0 Pkt | 0 Pkt | 11 Pcnt | 72.5 F |
| 1786719476 | 12.6 Volt | 0 Pkt | 0 Pkt | 7 Pcnt | 72.5 F |
| 1786719176 | 12.6 Volt | 0 Pkt | 0 Pkt | 7 Pcnt | 72.5 F |
| 1786718876 | 12.53 Volt | 0 Pkt | 0 Pkt | 6 Pcnt | 72.5 F |
| 1786718576 | 12.53 Volt | 0 Pkt | 0 Pkt | 6 Pcnt | 72.5 F |
| 1786718276 | 12.53 Volt | 0 Pkt | 0 Pkt | 5 Pcnt | 73.4 F |
| 1786717977 | 12.6 Volt | 0 Pkt | 0 Pkt | 0 Pcnt | 72.5 F |
| 1786717976 | 12.6 Volt | 0 Pkt | 0 Pkt | 0 Pcnt | 72.5 F |
| 1786717676 | 12.6 Volt | 0 Pkt | 0 Pkt | 0 Pcnt | 72.5 F |
| 1786717376 | 12.6 Volt | 0 Pkt | 0 Pkt | 0 Pcnt | 72.5 F |
| 1786717076 | 12.6 Volt | 0 Pkt | 0 Pkt | 0 Pcnt | 72.5 F |
| 1786716776 | 12.53 Volt | 0 Pkt | 0 Pkt | 0 Pcnt | 72.5 F |
| 1786716476 | 12.6 Volt | 0 Pkt | 0 Pkt | 4 Pcnt | 72.5 F |
| 1786716176 | 12.6 Volt | 0 Pkt | 0 Pkt | 23 Pcnt | 72.5 F |
| 1786715876 | 12.53 Volt | 10 Pkt | 10 Pkt | 42 Pcnt | 72.5 F |
| 1786715576 | 12.53 Volt | 20 Pkt | 20 Pkt | 47 Pcnt | 72.5 F |
| 1786715276 | 12.6 Volt | 30 Pkt | 20 Pkt | 56 Pcnt | 72.5 F |
| 1786714976 | 12.6 Volt | 30 Pkt | 20 Pkt | 56 Pcnt | 72.5 F |
*Used Equation Coefficients:
Vin: 0, 0.075, 0
Rx1h: 0, 10, 0
Dg1h: 0, 10, 0
Eff1h: 0, 1, 0
BarnT: 0, 0.9, -83.2
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)