This is the latest recevied telemetry packets stored in our database for station/object E25XKG-10. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | Temperatu* | Humidity* | Pressure* | Value4* | Value5* |
|---|---|---|---|---|---|
| 1790664800 | 30 | 66 | 1004 | 0 | 0 |
| 1790664200 | 30 | 65 | 1004 | 0 | 0 |
| 1790663601 | 30 | 66 | 1004 | 0 | 0 |
| 1790663001 | 30 | 68 | 1004 | 0 | 0 |
| 1790662400 | 30 | 68 | 1005 | 0 | 0 |
| 1790661800 | 30 | 68 | 1005 | 0 | 0 |
| 1790661200 | 30 | 69 | 1005 | 0 | 0 |
| 1790660601 | 29 | 69 | 1005 | 0 | 0 |
| 1790660000 | 29 | 70 | 1005 | 0 | 0 |
| 1790659401 | 29 | 71 | 1005 | 0 | 0 |
| 1790658801 | 29 | 71 | 1006 | 0 | 0 |
| 1790658201 | 29 | 72 | 1006 | 0 | 0 |
| 1790657613 | 29 | 73 | 1006 | 0 | 0 |
| 1790657001 | 29 | 74 | 1006 | 0 | 0 |
| 1790656400 | 29 | 75 | 1006 | 0 | 0 |
| 1790655801 | 29 | 76 | 1006 | 0 | 0 |
| 1790655201 | 28 | 76 | 1007 | 0 | 0 |
| 1790654601 | 28 | 77 | 1007 | 0 | 0 |
| 1790654001 | 28 | 77 | 1006 | 0 | 0 |
| 1790653401 | 28 | 79 | 1006 | 0 | 0 |
| 1790652801 | 28 | 78 | 1006 | 0 | 0 |
| 1790652201 | 28 | 79 | 1006 | 0 | 0 |
| 1790651600 | 28 | 80 | 1006 | 0 | 0 |
| 1790651001 | 28 | 81 | 1006 | 0 | 0 |
| 1790650401 | 28 | 81 | 1006 | 0 | 0 |
*Used Equation Coefficients:
Temperatu: 0, 1, 0
Humidity: 0, 1, 0
Pressure: 0, 1, 0
Value4: 0, 1, 0
Value5: 0, 1, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)