APRS Track Direct

My position About ☰

reset

IN3FSB-10 Telemetry

This is the latest recevied telemetry packets stored in our database for station/object IN3FSB-10. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

<< 1 2 >>

Time	Vin*	Rx1h*	Dg1h*	Eff1h*
1774085765	14.03 Volt	950 Pkt	230 Pkt	77 Pcnt
1774083964	13.95 Volt	910 Pkt	220 Pkt	78 Pcnt
1774082162	13.95 Volt	860 Pkt	190 Pkt	79 Pcnt
1774080362	13.95 Volt	840 Pkt	170 Pkt	78 Pcnt
1774074963	14.03 Volt	730 Pkt	140 Pkt	75 Pcnt
1774069564	14.03 Volt	700 Pkt	170 Pkt	76 Pcnt
1774067764	14.03 Volt	710 Pkt	150 Pkt	76 Pcnt
1774049764	14.03 Volt	690 Pkt	130 Pkt	74 Pcnt
1774046165	14.03 Volt	770 Pkt	180 Pkt	70 Pcnt
1774044364	13.88 Volt	730 Pkt	160 Pkt	70 Pcnt
1774042564	13.95 Volt	690 Pkt	160 Pkt	71 Pcnt
1774040764	14.03 Volt	700 Pkt	160 Pkt	70 Pcnt
1774035366	13.95 Volt	690 Pkt	150 Pkt	70 Pcnt
1774033564	13.95 Volt	680 Pkt	140 Pkt	69 Pcnt
1774031764	13.95 Volt	770 Pkt	190 Pkt	68 Pcnt
1774029966	13.95 Volt	800 Pkt	180 Pkt	72 Pcnt
1774028166	13.8 Volt	770 Pkt	180 Pkt	74 Pcnt
1774026365	13.95 Volt	680 Pkt	150 Pkt	70 Pcnt
1774024564	13.95 Volt	620 Pkt	140 Pkt	71 Pcnt
1774022765	13.95 Volt	630 Pkt	140 Pkt	75 Pcnt
1774019165	13.95 Volt	700 Pkt	130 Pkt	72 Pcnt
1774015564	13.95 Volt	650 Pkt	120 Pkt	69 Pcnt
1774013770	13.95 Volt	670 Pkt	110 Pkt	72 Pcnt
1774010167	13.95 Volt	780 Pkt	140 Pkt	75 Pcnt
1774008364	13.95 Volt	870 Pkt	190 Pkt	75 Pcnt

*Used Equation Coefficients:

Vin: 0, 0.075, 0

Rx1h: 0, 10, 0

Dg1h: 0, 10, 0

Eff1h: 0, 1, 0

A5: 0, 0, 0

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)