APRS Track Direct

My position About ☰

reset

HS5AU-10 Telemetry

This is the latest recevied telemetry packets stored in our database for station/object HS5AU-10. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

<< 1 2 3 4 >>

Time	VBAT*	IBAT*	SOLAR*	SUN*	TEMP*
1786746674	13.13 V	44 mA	7.41 V	2 W/m²	22.79 °C
1786746077	13.13 V	45 mA	7.41 V	2 W/m²	22.79 °C
1786745474	13.13 V	45 mA	7.41 V	2 W/m²	22.63 °C
1786744874	13.13 V	43 mA	7.41 V	2 W/m²	22.6 °C
1786744273	13.13 V	42 mA	7.42 V	2 W/m²	22.39 °C
1786743673	13.13 V	75 mA	7.41 V	2 W/m²	22.25 °C
1786743073	13.13 V	43 mA	7.42 V	2 W/m²	22.23 °C
1786742473	13.13 V	44 mA	7.41 V	2 W/m²	22.16 °C
1786741873	13.13 V	69 mA	7.41 V	2 W/m²	22.09 °C
1786741274	13.13 V	57 mA	7.42 V	2 W/m²	22.2 °C
1786740673	13.13 V	43 mA	7.41 V	2 W/m²	22.24 °C
1786740074	13.13 V	45 mA	7.42 V	2 W/m²	22.29 °C
1786739473	13.13 V	44 mA	7.41 V	2 W/m²	22.31 °C
1786738873	13.12 V	69 mA	7.41 V	2 W/m²	22.31 °C
1786738276	13.12 V	59 mA	7.41 V	2 W/m²	22.28 °C
1786737674	13.13 V	59 mA	7.41 V	2 W/m²	22.25 °C
1786737073	13.12 V	62 mA	7.41 V	2 W/m²	22.31 °C
1786736473	13.12 V	58 mA	7.41 V	2 W/m²	22.38 °C
1786735874	13.13 V	60 mA	7.41 V	2 W/m²	22.48 °C
1786735273	13.13 V	59 mA	7.41 V	2 W/m²	22.47 °C
1786734673	13.13 V	64 mA	7.41 V	2 W/m²	22.37 °C
1786734073	13.13 V	61 mA	7.42 V	2 W/m²	22.4 °C
1786733473	13.13 V	44 mA	7.42 V	2 W/m²	22.44 °C
1786732873	13.13 V	62 mA	7.41 V	2 W/m²	22.44 °C
1786732273	13.13 V	41 mA	7.42 V	2 W/m²	22.49 °C

*Used Equation Coefficients:

VBAT: 0, 0.01, 0

IBAT: 0, 1, -2000

SOLAR: 0, 0.01, 0

SUN: 0, 1, 0

TEMP: 0, 0.01, 0

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)