APRS Track Direct

My position About ☰

reset

SR5TM-1 Telemetry

This is the latest recevied telemetry packets stored in our database for station/object SR5TM-1. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

<< 1 2 3 4 >>

Time	RxTraffic*	TxTraffic*	RxDrop*	RSSI*	Voltage*
1836274478	86 Pkt	1 Pkt	1 Pkt	-42 dBm	14.07 V
1836274358	54 Pkt	0 Pkt	2 Pkt	-43 dBm	14.03 V
1774089410	0 Pkt	0 Pkt	0 Pkt	-39 dBm	13.95 V
1774088786	0 Pkt	0 Pkt	0 Pkt	-43 dBm	13.95 V
1774088162	0 Pkt	0 Pkt	0 Pkt	-44 dBm	13.92 V
1774087537	0 Pkt	0 Pkt	0 Pkt	-44 dBm	13.9 V
1774086913	0 Pkt	0 Pkt	0 Pkt	-40 dBm	13.97 V
1774086289	0 Pkt	0 Pkt	0 Pkt	-40 dBm	13.99 V
1774085665	0 Pkt	0 Pkt	0 Pkt	-41 dBm	13.97 V
1774085041	0 Pkt	0 Pkt	0 Pkt	-39 dBm	13.92 V
1774084417	0 Pkt	0 Pkt	0 Pkt	-42 dBm	13.95 V
1774083792	0 Pkt	0 Pkt	0 Pkt	-43 dBm	13.99 V
1774083168	0 Pkt	0 Pkt	0 Pkt	-43 dBm	13.99 V
1774082544	0 Pkt	0 Pkt	0 Pkt	-39 dBm	13.95 V
1774081920	0 Pkt	0 Pkt	0 Pkt	-40 dBm	13.95 V
1774081296	0 Pkt	0 Pkt	0 Pkt	-45 dBm	13.92 V
1774080672	0 Pkt	0 Pkt	0 Pkt	-43 dBm	13.95 V
1774080048	0 Pkt	0 Pkt	0 Pkt	-44 dBm	13.95 V
1774079424	0 Pkt	0 Pkt	0 Pkt	-41 dBm	13.95 V
1774078799	0 Pkt	0 Pkt	0 Pkt	-46 dBm	13.95 V
1774078175	0 Pkt	0 Pkt	0 Pkt	-53 dBm	13.95 V
1774077551	0 Pkt	0 Pkt	0 Pkt	-45 dBm	13.95 V
1774076927	0 Pkt	0 Pkt	0 Pkt	-45 dBm	13.92 V
1774076303	0 Pkt	0 Pkt	0 Pkt	-42 dBm	13.95 V
1774075679	0 Pkt	0 Pkt	0 Pkt	-43 dBm	14.03 V

*Used Equation Coefficients:

RxTraffic: 0, 1, 0

TxTraffic: 0, 1, 0

RxDrop: 0, 1, 0

RSSI: 0, -1, 0

Voltage: 0, 1, 0

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)