This is the latest recevied telemetry packets stored in our database for station/object KC3ARY. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | Battery Voltage* | Battery Current* | Load Current* | Solar Voltage* | Solar Current* |
|---|---|---|---|---|---|
| 1792295490 | 11.4 V | 305 mA | -278 mA | 0 V | 0 mA |
| 1792294890 | 11.4 V | 300 mA | -272 mA | 0 V | 0 mA |
| 1792294290 | 11.4 V | 300 mA | -273 mA | 0 V | 0 mA |
| 1792293688 | 11.4 V | 305 mA | -279 mA | 0 V | 0 mA |
| 1792293090 | 11.4 V | 296 mA | -270 mA | 0 V | 0 mA |
| 1792292490 | 11.41 V | 292 mA | -267 mA | 0 V | 0 mA |
| 1792291895 | 11.41 V | 291 mA | -264 mA | 0 V | 0 mA |
| 1792291295 | 11.41 V | 304 mA | -276 mA | 0 V | 0 mA |
| 1792290690 | 11.41 V | 298 mA | -269 mA | 0 V | 0 mA |
| 1792290088 | 11.42 V | 303 mA | -272 mA | 0 V | 0 mA |
| 1792289490 | 11.42 V | 303 mA | -274 mA | 0 V | 0 mA |
| 1792288290 | 11.42 V | 298 mA | -269 mA | 0 V | 0 mA |
| 1792287690 | 11.42 V | 308 mA | -277 mA | 0 V | 0 mA |
| 1792287090 | 11.43 V | 300 mA | -272 mA | 0.01 V | 0 mA |
| 1792286488 | 11.43 V | 306 mA | -275 mA | 0 V | 0 mA |
| 1792285890 | 11.43 V | 309 mA | -283 mA | 0 V | 0 mA |
| 1792285290 | 11.43 V | 303 mA | -276 mA | 0 V | 0 mA |
| 1792284690 | 11.43 V | 314 mA | -288 mA | 0 V | 0 mA |
| 1792284090 | 11.44 V | 318 mA | -293 mA | 0 V | 0 mA |
| 1792283492 | 11.44 V | 299 mA | -275 mA | 0 V | 0 mA |
| 1792282890 | 11.45 V | 299 mA | -272 mA | 0.01 V | 0 mA |
| 1792282295 | 11.45 V | 300 mA | -273 mA | 0.01 V | 0 mA |
| 1792281696 | 11.45 V | 292 mA | -265 mA | 0.04 V | 0 mA |
| 1792281091 | 11.46 V | 296 mA | -269 mA | 0.09 V | 0 mA |
| 1792280492 | 11.46 V | 306 mA | -279 mA | 0.24 V | 0 mA |
*Used Equation Coefficients:
Battery Voltage: 0, 0.01, 0
Battery Current: 0, 1, -4096
Load Current: 0, 1, -4096
Solar Voltage: 0, 0.01, 0
Solar Current: 0, 1, -4096
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)