APRS Track Direct

My position About ☰

reset

HB9BB Telemetry

This is the latest recevied telemetry packets stored in our database for station/object HB9BB. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

<< 1 2 3 4 >>

Time	Vin*	Rx1h*	Dg1h*	Eff1h*
1836274824	13.58 Volt	860 Pkt	740 Pkt	67 Pcnt
1836274524	13.43 Volt	860 Pkt	740 Pkt	67 Pcnt
1836274524	13.43 Volt	860 Pkt	740 Pkt	67 Pcnt
1836274376	13.58 Volt	860 Pkt	730 Pkt	68 Pcnt
1836274374	13.58 Volt	860 Pkt	730 Pkt	68 Pcnt
1836274224	13.58 Volt	880 Pkt	760 Pkt	68 Pcnt
1836273926	13.35 Volt	890 Pkt	770 Pkt	69 Pcnt
1836273924	13.35 Volt	890 Pkt	770 Pkt	69 Pcnt
1774091134	13.5 Volt	1040 Pkt	510 Pkt	82 Pcnt
1774091130	13.5 Volt	1040 Pkt	510 Pkt	82 Pcnt
1774090830	13.5 Volt	1060 Pkt	510 Pkt	82 Pcnt
1774090534	13.35 Volt	1070 Pkt	520 Pkt	82 Pcnt
1774090530	13.35 Volt	1070 Pkt	520 Pkt	82 Pcnt
1774090230	13.58 Volt	1070 Pkt	520 Pkt	83 Pcnt
1774089931	13.58 Volt	1090 Pkt	530 Pkt	84 Pcnt
1774089930	13.58 Volt	1090 Pkt	530 Pkt	84 Pcnt
1774089630	13.5 Volt	1090 Pkt	530 Pkt	83 Pcnt
1774089334	13.35 Volt	1090 Pkt	520 Pkt	84 Pcnt
1774089330	13.35 Volt	1090 Pkt	520 Pkt	84 Pcnt
1774089030	13.58 Volt	1080 Pkt	530 Pkt	83 Pcnt
1774088732	13.35 Volt	1080 Pkt	530 Pkt	83 Pcnt
1774088730	13.35 Volt	1080 Pkt	530 Pkt	83 Pcnt
1774088430	13.43 Volt	1070 Pkt	530 Pkt	82 Pcnt
1774088131	13.35 Volt	1080 Pkt	530 Pkt	82 Pcnt
1774088130	13.35 Volt	1080 Pkt	530 Pkt	82 Pcnt

*Used Equation Coefficients:

Vin: 0, 0.075, 0

Rx1h: 0, 10, 0

Dg1h: 0, 10, 0

Eff1h: 0, 1, 0

A5: 0, 0, 0

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)